Robot Gripper na Haɗin gwiwa - Z-EFG-80-200 Gripper Electric
Babban Kashi
Hannun mutum-mutumi na masana'antu / Haɗin gwiwar robot hannu / Electric gripper / mai fasaha mai hankali / mafita ta atomatik
Aikace-aikace
SCIC Z-EFG jerin robot grippers suna cikin ƙananan girman tare da ginanniyar tsarin servo, wanda ke ba da damar samun daidaitaccen iko na sauri, matsayi, da ƙarfi.SCIC yankan gefen gripping tsarin don sarrafa kansa zai ba ku damar buɗe sabbin dama don sarrafa ayyukan da ba ku taɓa tsammanin zai yiwu ba.
Siffar
· Babban ƙarfi
· Matsakaicin bugun jini, daidaitawa da ƙarfi
·Dogon rayuwa: dubun-dubatar zagayowar zagayowar, wuce gona da iri
· Gina mai sarrafawa: ƙananan sawun ƙafa, haɗin kai mai sauƙi
·Yanayin sarrafawa: 485 (Modbus RTU), I/O
Bugawa 80mm, Ƙarfin Ƙarfin 200N, Kulle Kai na Makani, Babu Faduwa bayan kashe wutar lantarki
Babban bugun jini
Jimlar bugun jini shine 80mm daidaitacce
Ƙarfin Ƙarfi
80-200N, shawarar matsawa nauyi ≤2kg
Makanikai Kulle Kai
Kulle kai na injina, babu zazzagewa koda an kashe wuta
An gina mai sarrafawa a ciki
Ƙananan ɗakin rufewa dace don haɗawa.
Saurin amsawa
Mafi ƙarancin lokacin bugun jini ɗaya shine kawai 0.8s
Tsawon Rayuwa
Dubun keken keke na miliyan, fiye da abin dakon iska
Ƙayyadaddun Siga
| Samfura No. Z-EFG-80-200 | Ma'auni |
| Jimlar bugun jini | 80mm daidaitacce |
| Karfin kamawa | 80-200N daidaitacce |
| Maimaituwa | ± 0.02mm |
| Nau'in riko da aka ba da shawarar | ≤2kg |
| Yanayin watsawa | Screw sanda + Lokaci bel + Jagorar ƙwallon |
| Man shafawa na abubuwa masu motsi | Kowane watanni shida ko motsi miliyan 1 / lokaci |
| Lokacin motsi bugun jini ta hanya ɗaya | 0.8s ku |
| Yanayin motsi | Yatsu biyu suna motsawa a kwance |
| Nauyi | 2kg |
| Girma (L*W*H) | 150*50*172mm |
| Wutar lantarki mai aiki | 24V± 10% |
| Ƙididdigar halin yanzu | 1A |
| Kololuwar halin yanzu | 8A |
| Ƙarfi | 30W |
| Ajin kariya | IP20 |
| Nau'in mota | Brushless DC |
| Yanayin zafin aiki | 5-55 ℃ |
| Yanayin zafi mai aiki | RH35-80 (Ba sanyi) |
| Halatta a tsaye lodi a tsaye | |
| Fz: | 250N |
| Ƙunƙarar da aka halatta | |
| Mx: | 58.5 nm |
| Nawa: | 15 nm |
| Mz: | 25.5 nm |
Daidaiton Ƙarfin Ƙarfi, Babban Maimaituwa
Z-EFG-80-200 gripper na lantarki ya karɓi ƙirar watsawa ta musamman da diyya ta algorithm tuki, jimlar bugun jini shine 80mm, ƙarfi mai ƙarfi shine 80-200N, bugun jini da ƙarfin sa ana daidaita su, kuma maimaitawar sa shine ± 0.02mm.
Saurin amsawa, Mai sauri da kwanciyar hankali
Mai ɗaukar wutar lantarki shine ɗaukar yanayin watsawa na sandar dunƙule + lokacin bel + jagorar ƙwallon ƙwallon ƙafa, mafi ƙarancin lokacin bugun bugun jini shine lokacin bugun jini shine kawai 0.8s, wanda zai iya saduwa da buƙatun ƙulla don layin samarwa.
Mamaye Ƙananan Yanki, Mai Sauƙi don Haɗuwa
Mai ɗaukar wutar lantarki shine ya ɗauki 2-yatsa-daidaitacce, girmansa shine L150 * W50 * H172mm, tsarinsa yana da ƙarfi, don tallafawa sama da hanyoyin shigarwa 5, an gina mai sarrafa sa, yana mamaye ƙaramin ɗaki, wanda zai iya zama mai sauƙin w magance daban-daban na clamping ayyuka.
Haɗaɗɗen Tuki da Mai Kulawa, Taushi mai laushi
Za'a iya canza wutsiya mai iyaka na Z-EFG-80-200 cikin sauƙi, nauyin ɗaure shi shine ≤2kg, abokin ciniki na iya tsara sassan wutsiya bisa ga abubuwan da aka ɗaure, don ba da garantin gripper ɗin wutar lantarki yana kammala aikin clamping a mafi girman.
Haɓaka Hanyoyin Gudanarwa, Sauƙi don Aiki
Daidaitawa na Z-EFG-80-200 gripper na lantarki yana da sauƙi, yana da nau'ikan sarrafawa masu yawa, ciki har da 485 (Modbus RTU), Pulse, I / O, wanda ya dace da tsarin kulawa na PLC.
Load Center of Gravity Offset
1) bugun wutar lantarki
2) Wurin Shigarwa (Ramin Zare)
3) Wurin Shigarwa (Pin Hole)
4) Matsayin Buɗe Hannu da Rufewa
5) Wurin Shigarwa na Kasa (Ramin Zaure)
6) Wurin Shigarwa na Kasa (Pin Hole)
7) Wurin Shigar Wuta (Pin Hole)
8) Wurin Shigarwa na Flank (Ramin Zare)
Kasuwancinmu
