Robot Gripper na Haɗin gwiwa - Z-EFG-130 Robot Arm Gripper
Babban Kashi
Hannun mutum-mutumi na masana'antu / Haɗin gwiwar robot hannu / Electric gripper / mai fasaha mai hankali / mafita ta atomatik
Aikace-aikace
SCIC Z-EFG jerin robot grippers suna cikin ƙananan girman tare da ginanniyar tsarin servo, wanda ke ba da damar samun daidaitaccen iko na sauri, matsayi, da ƙarfi.SCIC yankan gefen gripping tsarin don sarrafa kansa zai ba ku damar buɗe sabbin dama don sarrafa ayyukan da ba ku taɓa tsammanin zai yiwu ba.
Siffar
· Babban bugun jini
· Daidaitacce ƙarfi da ƙarfi da daidaitacce bugun jini
Tsawon rai: dubun-dubatar zagayowar zagayowar miliyoyi, da wuce gona da iri
· Mai sarrafawa mai ginawa: ƙananan girman, haɗin kai mai sauƙi
EIA485 sarrafa bas, I/O
Ƙarfin Ƙarfafawa: 40-130N, Y-Siffar Gripper na Lantarki tare da bugun jini na 120mm
Dogon bugun jini
Jimlar bugun jini: 120mm
Yanayin Sarrafa
485 Modbus, EIA485, Ikon Bus
Ƙarfin Ƙarfi
Ƙarfin Ƙarfi 40-130N Daidaitacce
Mai Sarrafa Ciki
Juya ƙaramin yanki, mai sauƙin haɗawa
Daidaitaccen Sarrafa
Maimaituwa: ± 0.02mm
Taushi mai laushi
Yana iya matse abubuwa masu rauni da nakasassu
● Ƙaddamar da juyin juya hali a cikin maye gurbin masu amfani da pneumatic da masu amfani da wutar lantarki, na farko na wutar lantarki tare da tsarin servo a kasar Sin.
● Cikakken maye gurbin kwampreshin iska + tace + bawul ɗin solenoid + bawul mai maƙarƙashiya + gripper pneumatic
● Rayuwar sabis na kewayawa da yawa, daidai da silinda na Jafananci na gargajiya
Ƙayyadaddun Siga
| Samfura No. Z-EFG-130 | Ma'auni |
| Jimlar bugun jini | 120mm |
| Karfin kamawa | 40-130N |
| Maimaituwa | ± 0.02mm |
| Nau'in riko da aka ba da shawarar | Max.1 kg |
| Watsawa yanayin | Screw goro + haɗin gwiwa |
| Man shafawa na abubuwa masu motsi | Kowane watanni shida ko motsi miliyan 1 / lokaci |
| Lokacin motsi bugun jini ta hanya ɗaya | 0.9s ku |
| Yanayin zafin aiki | 5-55 ℃ |
| Yanayin zafi mai aiki | Saukewa: RH35-80(Babu sanyi) |
| Yanayin motsi | Haɗin kai |
| Sarrafa bugun jini | daidaitacce |
| Daidaita ƙarfi da ƙarfi | daidaitacce |
| Nauyi | 0.8kg |
| Girma(L*W*H) | 171*187*40mm (bude) 218*66.5*40m (kusa) |
| Sanya mai sarrafawa | Gina-ciki |
| Ƙarfi | 10W |
| Nau'in mota | Brushless DC |
| Kololuwar Yanzu | 2A |
| Ƙarfin wutar lantarki | 24V |
| Yanayin jiran aiki | 0.4A |
| Halatta a tsaye lodi a tsaye | |
| Fz: | 200N |
| Ƙunƙarar da aka halatta | |
| Mx: | 2 nm |
| Nawa: | 2 nm |
| Mz: | 2 nm |
Toshe kuma Kunna, Mai dacewa don Haɗuwa
Z-EFG-130 gripper na lantarki na iya dacewa da haɗin gwiwar robot hannu, kuma ya haɗa tsarin servo a ciki, gripper ɗaya kawai zai iya zama daidai da compressor + filter + solenoid Valve + Throttle Valve + iska gripper.
Dogon bugun jini, Babban Daidaitawa
Ingantacciyar bugun jini na gripper na lantarki na iya zama har zuwa 120mm, girman rufewarsa shine 10mm, ana iya amfani da gripper na lantarki don guntuwar semiconductor, lantarki na 3C da sauran masana'antu daidai, da sauransu.
Karamin Girma, Dace don Haɗuwa
Girman buɗewa na Z-EFG-130 shine 171 * 187 * 40mm, girman rufewa shine 218 * 66.5 * 40mm, ƙaramin tsari ne, tallafi ninka nau'ikan shigarwa, mai sarrafawa a ciki, ƙaramin yanki an rufe shi.
Daidaiton Ƙarfin Ƙarfi
Mai riƙe da wutar lantarki shine yin amfani da ƙirar watsawa ta musamman da kuma fitar da diyya ta algorithm, ƙarfin matsawa shine 40-130N daidaitacce, shawarar clamping nauyi ≤1kg, kuma yana iya gane maimaitawa na ± 0.02mm.
Karɓi Adaɗi, Ana Canja Wutsiya
Mai riƙe da wutar lantarki na Z-EFG-130 yana goyan bayan ƙwanƙwasa daidaitacce, ya fi dacewa da madauwari, sphericity ko abu na musamman, sassan wutsiya na iya canzawa cikin sauƙi, abokan ciniki na iya matsa abubuwa bisa ga buƙatun su.
Haɓaka Hanyoyin Gudanarwa, Sauƙi don Aiki
Mai ɗaukar wutar lantarki na iya zama daidaito ta hanyar Modbus, ƙayyadaddun tsarin sa yana da sauƙi, don amfani da ka'idar sadarwa ta Digital I/O, kawai buƙatar kebul ɗaya don haɗawa da ON / KASHE, yana dacewa da babban tsarin kulawa na PLC.
Load Center of Gravity Offset
Kasuwancinmu
