HITBOT ELECTRIC GRIPPER SERIES – Z-EFG-C65 Mai Haɗin Wutar Lantarki
Babban Kashi
Hannun mutum-mutumi na masana'antu / Haɗin gwiwar robot hannu / Electric gripper / mai fasaha mai hankali / mafita ta atomatik
Aikace-aikace
SCIC Z-EFG jerin robot grippers suna cikin ƙananan girman tare da ginanniyar tsarin servo, wanda ke ba da damar samun daidaitaccen iko na sauri, matsayi, da ƙarfi. SCIC yankan gefen gripping tsarin don sarrafa kansa zai ba ku damar buɗe sabbin dama don sarrafa ayyukan da ba ku taɓa tsammanin zai yiwu ba.
Siffar
Gane digowar gripper, aikin fitar da yanki
· Ƙarfi, matsayi da sauri ana iya sarrafa daidai ta hanyar Modbus
·Dogon rayuwa: dubun-dubatar zagayowar zagayowar, wuce gona da iri
· Gina mai sarrafawa: ƙananan sawun ƙafa, haɗin kai mai sauƙi
·Yanayin sarrafawa: 485 (Modbus RTU), I/O
Stoke 65mm, Clamping Force 300N, Mai jituwa tare da Robot Arm 6-axis
Babban Mita
Mafi guntu lokacin bugun jini shine 0.5s
Babban Madaidaici
Maimaituwa shine ± 0.03mm
Babban Haɓaka
Nau'in matsawa shawarar ≤1.5 kg
Toshe kuma Kunna
Mai riƙe wutar lantarki na musamman don hannun mutum-mutumi na axis 6
Wutsiya Mai Canjawa
Wutsiyarsa tana canzawa, dacewa da buƙatun iri-iri
Taushi mai laushi
Yana iya matse abubuwa masu rauni da maras kyau
● Ƙaddamar da juyin juya hali a cikin maye gurbin masu amfani da pneumatic da masu amfani da wutar lantarki, na farko na wutar lantarki tare da tsarin servo a kasar Sin.
● Cikakken maye gurbin kwampreshin iska + tace + bawul ɗin solenoid + bawul mai maƙarƙashiya + gripper pneumatic
● Rayuwar sabis na kewayawa da yawa, daidai da silinda na Jafananci na gargajiya
Ƙayyadaddun Siga
| Samfura No. Z-EFG-C65 | Ma'auni |
| Jimlar bugun jini | 65mm daidaitacce |
| Karfin kamawa | 60-300N daidaitacce |
| Maimaituwa | ± 0.03mm |
| Nau'in riko da aka ba da shawarar | ≤6 kg |
| Yanayin watsawa | Gear Rack + Jagorar Dabaru |
| Man shafawa na abubuwa masu motsi | Kowane watanni shida ko motsi miliyan 1 / lokaci |
| Lokacin motsi bugun jini ta hanya ɗaya | 0.5s ku |
| Yanayin motsi | Yatsu biyu suna motsawa a kwance |
| Nauyi | 1.5kg |
| Girma (L*W*H) | 90*90*178mm |
| Wutar lantarki mai aiki | 24V± 10% |
| Ƙididdigar halin yanzu | 0.8A |
| Kololuwar halin yanzu | 2A |
| Ƙarfi | 20W |
| Ajin kariya | IP20 |
| Nau'in mota | Brushless DC |
| Yanayin zafin aiki | 5-55 ℃ |
| Yanayin zafi mai aiki | RH35-80 (Ba sanyi) |
| Halatta a tsaye lodi a tsaye | |
| Fz: | 600N |
| Ƙunƙarar da aka halatta | |
| Mx: | 15 nm |
| Nawa: | 15 nm |
| Mz: | 15 nm |
Haɗin Tuki da Mai Kulawa
Z-EFG-C65 gripper na lantarki ya haɗa tsarin servo a ciki, jimlar bugun jini shine 65mm, ƙarfin maɗaukaki shine 60-300N, bugun bugun jini da ƙarfin ƙarfin sa ana iya daidaita shi, kuma maimaitawarsa shine ± 0.03mm.
Dace da Shida-Axis Robot Arm
Mai riƙe da wutar lantarki na iya dacewa da hannu na robot 6-axis, don gane toshe da wasa, mafi ƙarancin lokacin bugun jini shine kawai 0.5s, wanda zai iya saduwa da buƙatun matsawa don ingantaccen layin samarwa.
Ƙananan Girma, Mai Sauƙi don Shigarwa
Z-EFG-C65 shine ɗaukar yanayin watsawa na rakodin kaya + dogo jagorar ball, girman samfurin shine L90 * W90 * H178mm, yana iya zama mai sauƙi don shirya cikin yanayin ƙaramin yanki.
Saurin Amsa, Daidaita don Sarrafa Ƙarfi
Mafi guntu lokacin idan bugun jini guda ɗaya shine kawai 0.5s, yana iya magance aiki mai sauri, sassan wutsiya na iya canzawa a kowane lokaci, abokan ciniki na iya daidaita wutsiyoyi bisa ga buƙatu.
Haɓaka Hanyoyin Gudanarwa, Sauƙi don Aiki
Tsarin Z-EFG-C50 yana da sauƙi, nau'in sarrafawa mai yawa, ciki har da 485 (Modbus RTU), Pulse, I / O, kuma yana dacewa da tsarin kulawa na PLC.
Load Center of Gravity Offset
Kasuwancinmu
