Jerin GIRIN LANTARKI NA HITBOT – GIRGIN LANTARKI NA Z-ECG-10 Mai Yatsu Uku

Jerin Gripper na Wutar Lantarki na HITBOT – Z-ECG-10 Mai Yatsu Uku Mai Lantarki Hoton da aka Fito

Takaitaccen Bayani:

Mai riƙe da wutar lantarki na Z-ECG-10 mai yatsu uku, maimaituwa shine ±0.03mm, yana da yatsu uku don mannewa, kuma yana da aikin gano faɗuwar mannewa, fitarwa na yanki, wanda zai iya zama mafi kyau don manne abubuwa na silinda.

Jimlar bugun jini:10mm (Daidaitacce)

Ƙarfin Matsewa:3-10N (Ana iya daidaitawa)

Maimaitawa:±0.03mm

Nauyin Matse Shawara:≤0.2kg

Mafi Gajeren Lokaci Don Bugawa Ɗaya:0.3s

Aika mana imel

Cikakken Bayani game da Samfurin

Alamun Samfura

Babban Rukuni

Hannun robot na masana'antu / Hannun robot na haɗin gwiwa / Riƙe wutar lantarki/Mai kunna fasaha/Mafita ta atomatik

Aikace-aikace

Fasali

·Gano faɗuwar matsewa, aikin fitarwa na yanki

·Ƙarfi, matsayi, saurin sarrafawa, madaidaicin iko ta hanyar Modbus

·Rikodi mai yatsa uku a tsakiya

·Mai sarrafawa a ciki: ƙaramin sawun ƙafa, haɗin kai mai sauƙi

·Yanayin sarrafawa: 485 (Modbus RTU), I/O

Gripper Mai Yatsu Uku Mai Sauƙin Manne Abubuwan Silinda

Babban Aiki

Ƙarfin Matsewa: 3-10N,

Yawan Makamashi Mai Girma

Daidaito ga Sarrafawa

Ana iya sarrafa shi ta hanyar Modbus

Mai Wayo don Ra'ayinka

Yana da aikin gano faɗuwar pf mai ƙarfi.

Mai Kula da Gina-ciki

Ƙaramin rufin sarari, mai sauƙin haɗawa.

Yanayin Sarrafawa da yawa

Tallafi 485 (Modbus) I/O

Gripper Mai Yatsu Uku

Yatsu uku don mannewa, ya dace da lokatai daban-daban

Kayayyaki Masu Alaƙa

Z-EFG-20

Z-EFG-100

Z-EFG-R

Sigar Musamman

Lambar Samfuri Z-ECG-10	Sigogi
Jimilla bugun jini	10mm
Ƙarfin riƙewa	3-10N
Maimaitawa	±0.03mm
Nauyin riƙewa da aka ba da shawarar	Matsakaicin. 0.2kg
Watsawa yanayin	Rack da Pinion + Layin Jagorar Kwallo
Cika mai na abubuwan da ke motsawa	Duk wata shida ko motsi miliyan 1 / lokaci
Lokacin motsi na bugun hanya ɗaya	0.3s
Matsakaicin zafin aiki	5-55℃
Tsarin zafi na aiki	RH35-80(Babu sanyi）
Blacklash	Gefe ɗaya: 0.2mm
Kula da bugun jini	Ana iya daidaitawa
Daidaita ƙarfin matsewa	Ana iya daidaitawa
Nauyi	0.5kg
Girma(*LWH*）	737395.5mm
Matsayin Kariya	IP20
Nau'in mota	Motar Wutar Lantarki ta Servo
Kololuwar Wutar Lantarki	0.6A
Ƙarfin wutar lantarki mai ƙima	24V ±10%
Tsarin aiki na yanzu	0.3A

Loda mai daidaituwa a tsaye
Fz:	70N

Juyin juyi mai izini
Mx:	0.64 Nm
Nawa:	0.4 Nm
Mz:	0.48 Nm

Daidaito ga Matsayi, Gripper Mai Yatsu Uku

Mai Gudanarwa da aka gina a ciki, Babban Haɗin kai

Kyakkyawan kariya ga ɗaukar kaya nan take, don tabbatar da cewa na'urar riƙe wutar lantarki ba ta da tsarin dakatarwa ko wani yanayi na daban. An gina shi a cikin mai sarrafawa, ana iya sarrafa ƙarfi, bit da sauri, yana rufe ƙananan wuraren aiki, mai sauƙin haɗawa.

Ƙaramin Siffa, Mai Sauƙi Don Shigarwa

Z-ECG-10 shine ya ɗauki nau'in rack da pinion + linear guide, girmansa shine L73 * W73 * H109, nauyinsa shine kawai 0.65kg, tsarinsa yana da ƙanƙanta, yana tallafawa nau'ikan shigarwa da yawa, yana da sauƙin kammala ayyuka da yawa na ɗaurewa.

Saurin Amsawa, Daidaitowar Ƙarfin Aiki

Gajeren bugun guda ɗaya shine 0.3s, ƙarfin matsewa shine 3-10N, bugun matsewa shine 10mm, nauyi shine kusan 0.2kg, wanda zai iya cimma daidaito mai girma don matsewa.

Yawan Yanayin Sarrafawa, Mai Sauƙin Aiki

Ana iya sarrafa Z-ECG-10 daidai ta Modbus, yana da sauƙin rarrabawa, don amfani da sadarwa na Digital I/O, kawai kuna buƙatar kebul ɗaya don haɗawa ON/KASHE, kuma yana dacewa da babban tsarin sarrafawa na PLC.