Mai kunna jerin matakai - Mai kunna wutar lantarki na Z-Mod-ST-54B
Babban Rukuni
Mai kunna wutar lantarki mai hankali / Mai kunna wutar lantarki mai wayo / Mai kunna wutar lantarki / Mai kunna wutar lantarki mai hankali
Fasaloli na musamman na haɗin gwiwa
- Ana iya samun daidaiton sanyawa mafi girma ta hanyar daidaita sassa da daidaita su, wanda hakan ke sa aikin ya zama abin dogaro.
- Ana iya yin yanayin juyawa/motsi a lokaci guda ba tare da sake saitawa ba.
- Yanayin turawa zai iya gano tsayin abin da aka tura, wanda hakan zai sa aikin Z-Mod ya fi wayo.
Siffofi
Tsarin da aka haɗa sosai
Tsarin kirkire-kirkire wanda ke kawar da buƙatar na'urori masu auna firikwensin, yayin da yake haɗa injin.
Mai sarrafawa a cikin module don mafi kyawun amfani da sarari da bugun jini.
Manhajar mai sauƙin amfani
Babu buƙatar gina dandamalin motsi, kamar yadda manhajar sarrafa jerin Z-Arm ke ba da damar aiki mai sauƙin amfani.
Yanayin shirye-shirye mai sauƙi yana ba wa masu amfani da ƙwarewa damar yin aiki tare.
Mai Sauƙi amma ba mai sauƙi ba
Jerin Servo: babu buƙatar firikwensin waje
Mai inganci da araha
Z-Mod yana ba da aiki mai kyau a masana'antu a farashi mai araha, tare da ƙarin ayyuka na musamman.
Mai sarrafawa a ciki (jerin sukurori), mai sarrafawa na waje (jerin bel)
Daidaitaccen wurin tunani na shigarwa
Sifili goro mai juyi (sukurin nau'in T) / bel ɗin polyurethane mai kama da ƙarfe da aka shigo da shi daga waje tare da zane mai tsabta (jerin bel ɗin daidaitawa)
Matsakaicin tsawon bugun jini-zuwa-jimla ya fi guntu ga bugun jini mai tasiri iri ɗaya
Ya fi dacewa da ƙananan kaya, babban gudu, da kuma lokutan sarari masu iyaka
Ba a fallasa su kai tsaye ba ta hanyar hatimi mai kyau, sukurori da bel ɗin synchronous.
Kayayyaki Masu Alaƙa
Sigar Musamman
| Bayanan motar Stepper | HL42CM06(Nazarin Leistritz 42CM06) | |
| Matsakaicin ƙarfin juyi | Jadawalin Aikin Lanƙwasa na Tunani | |
| Gubar dunƙule ta ƙwallo | 54mm | |
| Mafi girman gudu | Kwance: 300mm/s(1.5kg Nauyin da aka ɗauka) | Tsaye: 220mm/s(Kayan aiki 1.5kg) |
| Saurin da aka ƙima (Bayani na 1) | / | |
| Matsakaicin ƙarfin ɗaukar kaya a kwance/an ɗora a bango | 4kg | |
| Dutsen Tsaye | 1.5kg | |
| Ƙarfin da aka ƙima | 30N(Kwankwaso) | |
| Matsakaicin bugun jini | 100~500mm(Tazarar mm 100) | |
| Gudun da aka ƙima a injin | Jadawalin Aikin Lanƙwasa na Tunani | |
Lura na 1: 1G=9800mm/sec² Matsakaicin gudu don tunani ne kawai. Nauyin kaya da saurin suna da daidaiton juzu'i.
| Maimaitawa | ±0.03mm |
| Yanayin tuƙi | Belin lokaci (wayar polyurethane da aka shigo da ita daga ƙarfe) |
| Ƙarfin juyi mai ƙarfi (Bayani na 2) | Ma: 34.7N ·m; Mb: 34.7Nm;Mc:55.6N ·m |
| Tsawon tsawaita da aka yarda da lodawa | 120mm |
| Firikwensin | / |
| Tsawon kebul na firikwensin | 1.5m |
| Kayan tushe | Bayanin aluminum da aka fitar, mai sheki baƙi |
| Daidaiton tsarin shigarwa da ake buƙata | Faɗin ƙasa da 0.05mm |
| Yanayin aiki | 0~40℃，85%RH(Ba ya haɗa da ruwa) |
Bayani na 2: Darajar tsawon rayuwar aiki na kilomita 10,000
Tsarin wayoyi masu auna firikwensin
Ma'anar Karfin Juyawa
Bayanin lambar zane mai girma · inganci Naúra: mm
| Ingancin nauyin aiki | 100 | 200 | 300 | 400 | 500 |
| A | 251 | 351 | 451 | 551 | 651 |
| C | 100 | 200 | 300 | 400 | 500 |
| M | 2 | 4 | 5 | 7 | 8 |
| N | 6 | 10 | 12 | 16 | 18 |
| Inganci (kg) | 1.6 | 1.9 | 2.2 | 2.5 | 2.8 |
Kasuwancinmu
