Mai kunna jerin Servo - Z-Mod-SE-44-10SE Mai kunna wutar lantarki mai hankali

Ƙarfin/ƙarfin lantarki na injin:100 W / DC 24 V

Matsakaicin ƙarfin juyi:0.32 N·m

Maimaitawa:±0.01 mm

Nisan tafiya:50–500 mm (a cikin tazara ta mm 50)

Gudun da aka ƙima a injin:3000 rpm

Aika mana imel

Cikakken Bayani game da Samfurin

Mai kunna wutar lantarki mai hankali / Mai kunna wutar lantarki mai wayo / Mai kunna wutar lantarki / Mai kunna wutar lantarki mai hankali

- Ana iya samun daidaiton sanyawa mafi girma ta hanyar daidaita sassa da daidaita su, wanda hakan ke sa aikin ya zama abin dogaro.

- Ana iya yin yanayin juyawa/motsi a lokaci guda ba tare da sake saitawa ba.

- Yanayin turawa zai iya gano tsayin abin da aka tura, wanda hakan zai sa aikin Z-Mod ya fi wayo.

Tsarin da aka haɗa sosai

Tsarin kirkire-kirkire wanda ke kawar da buƙatar na'urori masu auna firikwensin, yayin da yake haɗa injin.

Mai sarrafawa a cikin module don mafi kyawun amfani da sarari da bugun jini.

Manhajar mai sauƙin amfani

Babu buƙatar gina dandamalin motsi, kamar yadda manhajar sarrafa jerin Z-Arm ke ba da damar aiki mai sauƙin amfani.

Yanayin shirye-shirye mai sauƙi yana ba wa masu amfani da ƙwarewa damar yin aiki tare.

Mai Sauƙi amma ba mai sauƙi ba

Jerin Servo: babu buƙatar firikwensin waje

Mai inganci da araha

Z-Mod yana ba da aiki mai kyau a masana'antu a farashi mai araha, tare da ƙarin ayyuka na musamman.

Lura: MN=164(ba tare da birki ba), MN=184 (tare da birki)

Akwai kuma na'urar kunna wutar lantarki ta hagu, don cikakkun bayanai, duba littafin samfurin na'urar kunna wutar lantarki.

Ƙarfin injin/ƙarfin lantarki	100W/DC24V
Matsakaicin ƙarfin juyi	0.32N·m
Gubar dunƙule ta ƙwallo	5mm	10mm
Mafi girman gudu	250mm/s	500mm/s
Saurin da aka ƙima (Bayani na 1)	0.3G	0.3G
Matsakaicin ƙarfin ɗaukar kaya a kwance/an ɗora a bango	30kg	15kg
Dutsen Tsaye	10kg	5kg
Ƙarfin da aka ƙima	361.7N	180.9N
Matsakaicin bugun jini	50~500mm(Tazarar mm 50)
Gudun da aka ƙima a injin	3000RPM

Lura 1：1G=9800mm/sec²

Maimaitawa	±0.01mm
Yanayin tuƙi	Sukurori na ball Φ10mm juya C7 aji
Ƙarfin juyi mai ƙarfi (Bayani na 2)	Ma: 8.7Nm; Mb: 8.7Nm; Mc: 12.5nm
Tsawon tsawaita da aka yarda da lodawa	Ƙasa da 200mm
Firikwensin	①-LS;②GIDA;③+LS, NPN, DC24V
Tsawon kebul na firikwensin	2m
Kayan tushe	Bayanan aluminum da aka fitar, farin sheki
Daidaiton tsarin shigarwa da ake buƙata	Faɗin ƙasa da 0.05mm
Yanayin aiki	0~40℃，85%RH (ba ya haɗa da ruwa)

Bayani na 2: Darajar tsawon rayuwar aiki na kilomita 10,000

Tsarin wayoyi masu auna firikwensin

Ma'anar Karfin Juyawa

Bayanin lambar zane mai girma · inganci Naúra: mm