Tefude Low Cost Custom Robotic Arm Spider Robot Manipulator Pick da Place for Gift Case Packaging

Tefude Ƙananan Kuɗi Na Musamman na Robotic Arm Spider Robot Manipulator Zaɓa da Wuri don Fitar da Marufi na Kyauta

Takaitaccen Bayani:

SCIC Z-Arm 2442 an tsara shi ta SCIC Tech, mutum-mutumi na haɗin gwiwa mara nauyi, mai sauƙin shiri da amfani, yana tallafawa SDK.Bugu da kari, yana da goyan bayan gano karo, wato, zai zama atomatik don tsayawa lokacin taɓa ɗan adam, wanda ke da haɗin gwiwar injin mutum da injin, tsaro yana da girma.

Z axis bugun jini:240mm (tsawo za a iya musamman)

Gudun linzamin kwamfuta:1255.45mm/s (nauyin kaya 1.5kg) 1023.79mm/s (nauyin kaya 2kg)

Maimaituwa:± 0.03mm

Madaidaicin kaya:2kg

Matsakaicin kaya:3kg

Aika mana imel

Cikakken Bayani

Tags samfurin

Tefude Low Cost Custom Robotic Arm Spider Robot Manipulator Pick da Place for Gift Case Packaging

Babban Kashi

Hannun mutum-mutumi na masana'antu / Haɗin gwiwar robot hannu / Electric gripper / mai fasaha mai hankali / mafita ta atomatik

bayanin samfurin:
Gabatar da sabbin hanyoyin haɗin gwiwar masana'antu, wanda aka ƙera don sauya masana'antu ta hanyar samar da mafita iri-iri don ayyuka iri-iri.Tare da ci gaba da fasalulluka da fasaha na fasaha, robots na haɗin gwiwarmu sune cikakkiyar ƙari ga kowane layin samarwa, yana sa su zama masu inganci, masu amfani da tsada.

Bayanin samfur:
Robots na haɗin gwiwar masana'antu an ƙera su musamman don gudanar da ayyuka kamar lodi, taro, zane da zane, da ɗauka da wuri.Tare da damar haɗin gwiwarsa, zai iya yin aiki tare da ma'aikatan ɗan adam don ƙirƙirar yanayin aiki mai aminci da inganci.

Robot na haɗin gwiwar an sanye shi da na'urori masu auna firikwensin zamani da software mai hankali, yana ba shi damar yin ayyuka masu rikitarwa tare da daidaito.Tsarin hangen nesa na ci gaba yana iya gano abubuwa cikin sauƙi, yana tabbatar da aiki mara kyau yayin haɗuwa da ɗawainiya.Ƙarfin yawan kuɗin da mutum-mutumi ke da shi da kuma ikon yin aiki a kan nesa mai nisa yana ba da mafi girman sassauci don sarrafa abubuwa da yawa da yawa.

Bugu da ƙari, an ƙera robots ɗin haɗin gwiwarmu don zama mai sauƙi ga masu aiki don tsarawa, kawar da buƙatar ƙwararrun masu fasaha.Ƙwararrun abokantaka na mai amfani yana ba da damar shirye-shirye mai sauri da fahimta, rage lokacin saiti da ƙara yawan yawan aiki.

Bugu da ƙari, mutum-mutumi na haɗin gwiwar suna sanye da ingantattun fasalulluka na aminci.Yana da na'urori masu auna firikwensin ciki waɗanda ke gano kowane kasancewar kusa, yana tabbatar da amincin ma'aikaci.Hakanan yana fasalta gano haɗarin karo, yana ba shi damar amsawa da daidaitawa ga canje-canje a cikin muhalli, hana haɗari da lalacewa.

Ta hanyar haɗa robots ɗin haɗin gwiwar masana'antu a cikin layin samar da ku, zaku iya haɓaka yawan aiki da rage farashin aiki.Ƙarfin aikin sa da yawa ya sa ya zama mafita mai kyau ga masana'antu irin su motoci, lantarki da masana'antu.

Gabaɗaya, robots ɗin haɗin gwiwar masana'antu masu inganci da inganci sune cikakkiyar mafita ga masana'antun da ke neman haɓaka hanyoyin samar da su.Tare da ikonsa na gudanar da ayyuka daban-daban da kuma aiki tare da masu aiki na ɗan adam, yana ba da mafita mai aminci, inganci da farashi don ɗaukar nauyi, haɗuwa, sutura da zanen, da ɗauka da sanya ayyuka.A yau, sabbin na'urorin haɗin gwiwarmu za su canza layin samar da ku.

Aikace-aikace

SCIC Z-Arm cobots suna da nauyi 4-axis robots haɗin gwiwa tare da injin tuƙi da aka gina a ciki, kuma ba sa buƙatar masu ragewa kamar sauran scara na gargajiya, suna rage farashin da kashi 40%.SCIC Z-Arm cobots na iya gane ayyuka ciki har da amma ba'a iyakance ga bugu na 3D ba, sarrafa kayan aiki, walda, da zanen Laser.Yana da ikon inganta ingantaccen aiki da sassaucin aikinku da samarwa.

Siffofin

Babban Madaidaici
Maimaituwa
± 0.03mm

Babban kaya
3kg

Manyan Hannun Hannu
JI axis 220mm
J2 axis 200mm

Farashin farashi
Ingancin matakin masana'antu
Cm farashin

Samfura masu dangantaka

Z-Arm-2140

Z-Arm-1832

Z-Arm-S922

Ƙayyadaddun Siga

Z-Arm 2442 Robot Haɗin gwiwa	Ma'auni
Tsawon hannun axis 1	mm 220
1 kusurwar jujjuya axis	±90°
Tsawon hannun axis 2	200mm
2 kusurwar juyawa axis	± 164°
Z axis bugun jini	210mm (tsawo za a iya musamman)
kewayon jujjuyawar axis	± 1080°
Gudun linzamin kwamfuta	1255.45mm/s (nauyin kaya 1.5kg) 1023.79mm/s (nauyin kaya 2kg)
Maimaituwa	± 0.03mm
Daidaitaccen kaya	2kg
Matsakaicin kaya	3kg
Digiri na 'yanci	4
Tushen wutan lantarki	220V/110V50-60HZ daidaitawa zuwa 24VDC mafi girman ƙarfin 500W
Sadarwa	Ethernet
Faɗawa	Gina mai haɗaɗɗen mai sarrafa motsi yana ba da 24 I/O + faɗaɗa ƙarƙashin hannu
Za a iya daidaita axis Z-axis a tsayi	0.1m-1m
Z-axis jan koyarwa	/
An tanadar da haɗin wutar lantarki	Daidaitaccen daidaitawa: 24 * 23awg (marasa kariya) wayoyi daga sashin soket ta hannun murfin ƙasa Zabin: 2 φ4 injin bututu ta hanyar soket panel da flange
Masu daidaita wutar lantarki na HITBOT	T1: daidaitaccen tsarin I / O, wanda za'a iya daidaita shi zuwa Z-EFG-8S/Z-EFG-12/Z-EFG-20/ Z-EFG-30 T2: nau'in I/O yana da 485, wanda za'a iya haɗa shi da masu amfani da Z-EFG-100/Z-EFG-50 kuma wasu suna buƙatar sadarwar 485
Hasken numfashi	/
Kewayon motsi na hannu na biyu	Daidaitaccen: ± 164° Na zaɓi: 15-345deg
Na'urorin haɗi na zaɓi	/
Amfani da muhalli	Yanayin yanayi: 0-55°C Humidity: RH85 (ba sanyi)
shigarwar dijital tashar tashar I/O (keɓe)	9+3+ tsawo na hannun gaba (na zaɓi)
Fitowar dijital ta tashar I/O (keɓe)	9+3+ tsawo na hannun gaba (na zaɓi)
Shigar da tashar tashar tashar tashar I/O (4-20mA)	/
I/O tashar analog fitarwa (4-20mA)	/
Tsawon hannun Robot	mm 596
Nauyin hannu na Robot	240mm bugun jini net nauyi 19kg
Girman tushe	200mm20010mm
Nisa tsakanin ramukan gyara tushe	160mm * 160mm tare da hudu M8 * 20 sukurori
Gano karo	√
Jawo koyarwa	√

Motion Range M1 Version (Juyawa waje)

Gabatarwar Interface

Robotic Arm na Masana'antu - Z-Arm-1832 (4)

An shigar da ƙirar hannu na robot Z-Arm 2442 a wurare 2, gefen tushen hannun robot (wanda aka bayyana a matsayin A) da kuma bayan hannun ƙarshen.Ƙungiyar mu'amala a A tana da ikon canza wutar lantarki (JI), 24V ikon samar da wutar lantarki DB2 (J2), fitarwa zuwa mai amfani I/O tashar jiragen ruwa DB15 (J3), shigar da mai amfani I/O tashar jiragen ruwa DB15 (J4) da maɓallin daidaitawar adireshin IP. (K5).Ethernet tashar jiragen ruwa (J6), tsarin shigarwa / fitarwa tashar jiragen ruwa (J7), da biyu 4-core madaidaiciya-ta wayoyi soket J8A da J9A.

Matakan kariya

1. Ƙaddamarwa rashin aiki

Ana nuna cibiyar ɗaukar nauyin nauyi na nauyi da kewayon ƙimar da aka ba da shawarar tare da inertia motsi na axis a cikin hoto 1.

Robotic Arm na Masana'antu - Z-Arm-1832 (6)

Hoto1 XX32 jerin jigilar kaya bayanin

2. Karfin karo
Ƙarfin haɓakar kariya ta haɗin gwiwa a kwance: ƙarfin jerin XX42 shine 40N.

3. Z-axis ƙarfin waje
Ƙarfin waje na axis Z ba zai wuce 120N ba.

Hoto 2

4. Bayanan kula don shigarwa na musamman Z axis, duba Hoto 3 don cikakkun bayanai.

Robotic Arm na Masana'antu - Z-Arm-1832 (8)

Hoto 3

Bayanan Gargaɗi:

(1) Don ƙirar Z-axis da aka keɓance tare da babban bugun jini, Rigidity Z-axis yana raguwa yayin da bugun jini ya karu.Lokacin da bugun jini na Z-axis ya wuce ƙimar da aka ba da shawarar, mai amfani yana da ƙaƙƙarfan buƙatun, kuma saurin shine> 50% na matsakaicin matsakaicin, ana ba da shawarar sosai don shigar da tallafi a bayan axis na Z don tabbatar da cewa tsattsauran ra'ayi. hannun mutum-mutumi ya cika buƙatu a babban gudun.

Ƙimar da aka ba da shawarar sune kamar haka: Z-ArmXX42 jerin Z-axis bugun jini> 600mm

(2) Bayan bugun bugun Z-axis ya karu, a tsaye na axis na Z-axis da tushe za a ragu sosai.Idan tsauraran ƙayyadaddun ƙayyadaddun buƙatun ga axis na Z-axis da maƙasudin tushe ba su da amfani, da fatan za a tuntuɓi ma'aikatan fasaha daban.

5.Power na USB hot-plugging haramun.Juya gargaɗin lokacin da aka katse ingantattun sanduna mara kyau da mara kyau na wutar lantarki.

6. Kar a danna hannun kwance lokacin da wutar ke kashe.