Jerin Saurin Canzawa – QCA-S500 Na'urar Canzawa Mai Sauri a Ƙarshen Robot

Takaitaccen Bayani:

Ana amfani da na'urar canza saurin aiki a masana'antar kera motoci don walda tabo, sauya wurin shigar da wutar lantarki mai yawa, sarrafa manyan kaya masu biyan kuɗi, nauyin da ya kai kilogiram 500.

Matsakaicin nauyin da ake buƙata:500 kg

Ƙarfin Kullewa@80Psi (5.5Bar):38000 N

Ƙarfin Load Mai Tsayi (X&Y):3290 Nm

Ƙarfin Load Mai Tsayi (Z):3160 Nm

Daidaiton maimaitawa (X, Y&Z):±0.015 mm

Nauyi bayan an kulle:23.4 kg

Nauyin ɓangaren robot:15.9 kg

Nauyin gefen gripper:7.5 kg

Matsakaicin karkacewar kusurwa da aka yarda da ita:±1°

Aika mana imel

Cikakken Bayani game da Samfurin

Alamun Samfura

Babban Rukuni

Mai Canza Kayan Aiki na Robot / Mai Canza Kayan Aiki na Ƙarshen Hannun Hannu (EOAT) / Tsarin Canzawa da Sauri / Mai Canza Kayan Aiki ta atomatik / Tsarin Kayan Aiki na Robot / Gefen Robot / Sassauƙaƙen Kayan Aiki / Saki da Sauri / Mai Canza Kayan Aiki na Pneumatic / Mai Canza Kayan Aiki na Wutar Lantarki / Mai Canza Kayan Aiki na Hydraulic / Mai Canza Kayan Aiki na Daidaito / Tsarin Kulle Tsaro / Mai Tasirin Ƙarshe / Aiki da Kai / Ingancin Canza Kayan Aiki / Musayar Kayan Aiki / Aiki da Kai na Masana'antu / Kayan Aiki na Ƙarshen Hannun Robot / Tsarin Modular

Aikace-aikace

Ana amfani da Kayan Aikin Ƙarshen Hannun Hannu (EOAT) sosai a masana'antu kamar kera motoci, na'urorin lantarki na 3C, dabaru, ƙera allura, marufi na abinci da magunguna, da sarrafa ƙarfe. Manyan ayyukansa sun haɗa da sarrafa kayan aiki, walda, feshi, dubawa, da sauya kayan aiki cikin sauri. EOAT yana ƙara inganta ingancin samarwa, sassauci, da ingancin samfura sosai, wanda hakan ya sa ya zama muhimmin ɓangare na sarrafa kansa na masana'antu na zamani.

Fasali

Babban daidaito

Gefen maƙallin daidaitawa na piston yana taka rawar matsayi, wanda ke ba da daidaiton matsayi mai maimaitawa mai yawa. Gwaje-gwajen zagaye miliyan ɗaya sun nuna cewa daidaiton ainihin ya fi ƙimar da aka ba da shawarar.

Babban ƙarfi

Piston ɗin kullewa mai girman silinda yana da ƙarfin kullewa mai ƙarfi, na'urar robot ta SCIC mai sauri tana da ƙarfin hana juyawa. Lokacin kullewa, ba za a yi girgiza ba saboda motsi mai sauri, don haka guje wa gazawar kullewa da tabbatar da daidaiton matsayi akai-akai.

Babban aiki

An yi amfani da tsarin kullewa tare da ƙirar saman mazugi mai yawa, abubuwan rufewa na tsawon rai da kuma binciken lamba mai inganci don tabbatar da kusancin siginar module.

Kayayyaki Masu Alaƙa

Sigar Musamman

Jerin Saurin Canzawa
Samfuri	Matsakaicin nauyin da ake buƙata	Daidaiton maimaitawa (X, Y&Z)	Ƙarfin Kullewa@80Psi (5.5Bar)	Nauyin samfurin
QCA-S500	500kg	±0.015mm	38000N	23.4kg

Bangaren robot

Gefen gripper

Module Mai Aiki

Module na Wutar Lantarki na Walda

Sunan Samfuri	Samfuri	PN
Module na Wutar Lantarki na gefe na Robot	QCSM-03R	7.Y02069
Gripper gefen Welding Power Module	QCSM-03G	7.Y02070

Module na Tsawaita Iska

Sunan Samfuri	Samfuri	PN
Bangaren robot mai shelar kansa Tsarin Tsawaita Pneumatic	QCAM-08G38R	7.Y02051
Gripper gefen kansa ya kira kansa Pneumatic Extension Module	QCAM-08G38G	7.Y02052