Jagorar Motsawa Mai Lankwasa Mai Lankwasa Mai Tuƙin Bugawa Mai Axis Da Yawa Jagorar Motsawa Mai Lankwasa Mai Lankwasa Mai Hannun Robot Mai Aiki

Jagorar Motsawa Mai Lankwasa Mai Lankwasa Jagorar Lankwasa Mai Aiki Hannun Robot Hoton da aka Fito

Takaitaccen Bayani:

Z-Arm 1522 wani hannu ne mai sauƙin amfani da robot mai sassa 4 tare da na'urar sarrafawa/tushen na'ura. Ana iya canza tashar Z-Arm 1522, wanda ya dace don maye gurbin da kuma biyan buƙatun kamfanoni daban-daban. Ta hanyar canza na'urorin tashoshi daban-daban, zai iya zama mataimakin ku don yin aiki tare da ku. Ana iya amfani da shi a cikin firintar 3D, kayan sarrafawa, na'urar walda tin, injin sassaka laser, robot mai rarrabawa, da sauransu. Yana iya fahimtar abin da za ku iya tunanin, ƙara inganci da sassaucin aiki.

Aika mana imel

Cikakken Bayani game da Samfurin

Alamun Samfura

Jagorar Motsawa Mai Lankwasa Mai Lankwasa Mai Tuƙin Bugawa Mai Axis Da Yawa Jagorar Motsawa Mai Lankwasa Mai Lankwasa Mai Hannun Robot Mai Aiki

Aikace-aikace & Hasken Haske

1. Aikace-aikacen PC, wanda aka haɗa shi da shirye-shiryen Blockly don ƙara haɓaka ƙwarewar aiki. Fuskantar kasuwar ilimi, nishaɗi da ilmantarwa. Mai sauƙin aiki da sauri don farawa.
2. Ƙarami a girma kuma mafi gasa a farashi. Ƙara rage farashin da 1/3.
3. Hannun robot mai aiki da yawa don saduwa da kerawa mara iyaka. Rubutu, zane, bugu na 3D, sassaka ......
4. Yana da dukkan fa'idodin jerin Z-Arm. Haɗin gwiwa mai aminci, adana sarari, sauƙin amfani, da sauƙin amfani.

Nunin Aikace-aikace

Gripper na Wutar Lantarki

Hannun Robot na Haɗin gwiwar Bugawa na 3D

Bugawa ta 3D

Kofin tsotsa

Zane

Hadin gwiwar Robotic Arm na Laser Engraving

Zane-zanen Laser

Kayayyaki Masu Alaƙa

Sigar Musamman

Hannun robot na haɗin gwiwa na Z-Arm 1522	Sigogi
Tsawon Hannun Axis 1	100mm
Kusurwar Juyawa ta Axis 1	±90°
Tsawon Hannun Axis 2	120mm
Kusurwar Juyawa ta Axis 2	±150°
Bugawar Z Axis	150mm
Tsarin Juyawa na Axis na R	±180°
Gudun Layi	500mm/s
Maimaitawa	±0.1mm
Nauyin Aiki na yau da kullun	0.3kg
Matsakaicin nauyin da ake buƙata	0.5kg
Digiri na 'Yanci	3
Tushen wutan lantarki	Daidaita 220V/110V50-60HZ zuwa 24V
Sadarwa	Tashar jiragen ruwa ta serial
Ma'aunin girma	Akwai
Shigarwar Dijital ta I/O (Wanda aka keɓe)	≤14
Fitowar Dijital ta I/O (Wanda aka keɓe)	≤22
Shigar da Analog na Tashar I/O (4-20mA)	≤6
Fitowar Analog ta Tashar I/O (4-20mA)	0
Tsawon Inji	400mm
Nauyin Inji	4.8kg
Girman Ƙasashen waje	160mm160mm45mm
Gano Karo	√
Koyarwar Jawo	√

Kayan Aikin Tashar

Shugaban Bugawa na 3D	Matsakaicin girman bugawa (LWH)	150mm150mm150mm (MAX)
	Kayan aikin buga 3D	Φ1.75mm PLA
	Daidaito	0.1mm
Laser	Amfani da wutar lantarki	500mw
	Tsawon Raƙuman Ruwa	405nm (Laser mai launin shuɗi)
	Tushen wutan lantarki	12V, TTL mai kunna wuta (Tare da direban PWM)
Mai Riƙon Alƙalami	Diamita na goga	10mm
Kofin tsotsa	Diamita na kofin tsotsa	20mm
Famfon Iska	Tushen wutan lantarki	12V, TTL mai kunna wuta
Famfon Iska	Matsi	±35Kpa
Mai ɗaukar iska	Matsakaicin buɗewa	27.5mm
	Nau'in tuƙi	Ciwon huhu
	Ƙarfin matsewa	3.8N