Hannun Robotika na SCARA – Hannun Robotika na Haɗin gwiwa na Z-Arm-4150
Babban Rukuni
Hannun robot na masana'antu / Hannun robot na haɗin gwiwa / Riƙe wutar lantarki/Mai kunna fasaha/Mafita ta atomatik
Aikace-aikace
SCIC Z-Arm cobots robot ne masu sauƙin nauyi mai sassa 4 tare da injin tuƙi da aka gina a ciki, kuma ba sa buƙatar masu rage farashi kamar sauran scara na gargajiya, wanda ke rage farashi da 40%. SCIC Z-Arm cobots na iya yin ayyuka waɗanda suka haɗa da amma ba'a iyakance ga bugu na 3D ba, sarrafa kayan aiki, walda, da sassaka laser. Yana da ikon inganta inganci da sassaucin aikinku da samarwa.
Siffofi
Babban Daidaito
Maimaitawa
±0.05mm
Babban Nauyin Aiki
Nauyin nauyi 4kg
Matsakaicin 5kg
Mafi Girman Gudu
Matsakaicin gudu mai layi 1.4m/s
(Nauyin da aka ɗora a tsaye 4kg)
Farashin Mai Kyau
Ingancin matakin masana'antu
Cfarashi mai kyau
Mai Sauƙin Shiryawa, Mai Saurin Shigarwa, Hannun Robot Mai Sauƙi Mai Sauƙi 4
Babban Lodi
Nauyin Daidaitacce: 4kgMatsakaicin Load: 5kg
Babban Daidaito
Maimaitawa: ±0.05mm
Tsarin Z-Axis na Musamman
Ana iya keɓance bugun sama da ƙasa tsakanin 10mm-1000mm
Babban Gudu
Gudun layin sa yana kaiwa 1400mm/s ƙarƙashin nauyin 4kg
Mai Sauƙin Amfani
Haka kuma yana da sauƙin amfani har ma ga wanda bai taɓa sanin robot ba a da
Hadakar Drive da Mai Kulawa
Babu ƙarin da'ira, mai sauƙin shigarwa da haɗawa
Kayayyaki Masu Alaƙa
Sigar Musamman
An tsara SCIC Z-Arm 4150 ta SCIC Tech, robot ne mai sauƙin amfani, mai sauƙin tsarawa da amfani, yana tallafawa SDK. Bugu da ƙari, ana tallafawa gano karo, wato, zai tsaya ta atomatik lokacin da aka taɓa ɗan adam, wanda shine haɗin gwiwa tsakanin ɗan adam da injin, tsaro yana da girma.
| Hannun Robot na haɗin gwiwa na Z-Arm 4150 | Sigogi |
| Tsawon hannu 1 axis | 275mm |
| Kusurwar juyawa ta axis 1 | ±90° |
| Tsawon hannu mai axis 2 | 225mm |
| Kusurwar juyawa ta axis guda biyu | ±164° Zabi: 15-345dig |
| Juyawar axis ta Z | Ana iya keɓance tsayin 410 |
| Tsarin juyawar axis na R | ±1080° |
| Gudun layi | 1400mm/s (nauyin da ya kai kilogiram 4) |
| Maimaitawa | ±0.05mm |
| Nauyin da aka saba ɗauka | 4kg |
| Matsakaicin nauyin da ake buƙata | 5kg |
| Matakin 'yanci | 4 |
| Tushen wutan lantarki | Daidaita 220V/110V50-60HZ zuwa 48VDC mafi girman ƙarfin lantarki 960W |
| Sadarwa | Ethernet |
| Faɗaɗawa | Mai sarrafa motsi mai haɗawa a ciki yana ba da faɗaɗa I/O 24 + ƙarƙashin hannu |
| Za a iya keɓance Z-axis a tsayi | 0.1m~1m |
| Koyarwar jan-axis Z | / |
| An tanadar hanyar sadarwa ta lantarki | Tsarin tsari na yau da kullun: wayoyi 24 * 23awg (marasa kariya) daga sashin soket ta cikin murfin hannu na ƙasa Zaɓi: Bututun injin 2 φ4 ta cikin kwamitin soket da flange |
| Masu riƙe wutar lantarki na HITBOT masu jituwa | Z-EFG-8S/Z-EFG-12/Z-EFG-20/Z-EFG-20S/Z-EFG-20F/Z-ERG-20C/Z-EFG-30/Z-EFG-50/Z-EFG-100/the 5thAxis, bugu na 3D |
| Hasken numfashi | / |
| Tsarin motsi na hannu na biyu | Daidaitacce: ±164° Zaɓi: 15-345dig |
| Kayan haɗi na zaɓi | / |
| Amfani da muhalli | Zafin yanayi: 0-45°C Danshi: 20-80%RH (babu sanyi) |
| Shigarwar dijital ta tashar I/O (wanda aka keɓe) | Tsawaita hannun gaba 9+3+ (zaɓi ne) |
| Fitar dijital ta tashar I/O (keɓe) | Tsawaita hannun gaba 9+3+ (zaɓi ne) |
| Shigar da analog na tashar I/O (4-20mA) | / |
| Fitowar analog ta tashar I/O (4-20mA) | / |
| Tsawon hannun robot | 830mm |
| Nauyin hannun robot | Nauyin nauyi mai nauyin 410mm 28kg |
| Girman tushe | 250mm*250mm*15mm |
| Nisa tsakanin ramukan da aka gyara tushe | 200mm*200mm tare da sukurori guda huɗu na M8*20 |
| Gano karo | √ |
| Koyarwar ja | √ |
Matsakaicin Lodi: 5kg, Zaɓin da ya dace don Aikin Taro
Z-Arm XX50 yana da sassauƙan hannu na robot mai sassauƙa 4, matsakaicin nauyinsa na iya kaiwa 5kg, yana mamaye ƙaramin yanki, ya dace sosai don sanya shi a tashar aiki ko a cikin injina, zaɓi ne mai kyau don layukan samar da taro ta atomatik.
Mai Sauƙi, Babban Kusurwar Juyawa
Nauyin samfurinsa yana da kimanin kilogiram 28, tsawon hannun yana da har zuwa 275mm, kusurwar juyawa ta axis 1 shine ±90°, kusurwar juyawa ta axis 2 shine ±164°, kewayon juyawa na axis na R zai iya kaiwa ±1080°.
Ana iya keɓance tsayinsa cikin sauƙi
Haɗaɗɗen tuƙi da mai sarrafawa, babu ƙarin da'ira, mai sauƙin shigarwa da haɗawa, tsayin Z-axis za a iya keɓance shi tsakanin 10mm-1000mm, yana iya yin juyawa na ciki don guje wa toshewa.
Mai Sauƙi don Shigarwa, Saurin Canzawa
Z-Arm XX50 wani babban hannu ne na robot mai haɗaka, yana da halaye na adana sarari kuma mai sassauƙa don tura shi, ya dace da tura shi a aikace-aikace da yawa, babu canza tsarin samarwa na yau da kullun, gami da sauyawa cikin sauri da kammala ƙaramin rukuni na samarwa, da sauransu.
Babban Haɗin gwiwa da Tsaro
Hannun Robot zai iya yin aiki tare da ɗan adam ba tare da ƙarin kariya ba, don maye gurbin ayyukan da suke da datti, haɗari da ban sha'awa, don gujewa da rage yawan raunin da ya faru da kuma raunin da ya faru.
Sigar Motsi ta M1 (Juya Waje)
Shawarar Mai Haɗa DB15
Samfurin da aka ba da shawara: Namiji mai fenti mai zinare mai harsashi ABS YL-SCD-15M Mace mai fenti mai zinare mai harsashi ABS YL-SCD-15F
Girman Bayani: 55mm*43mm*16mm
(Duba Hoto na 5)
Zane na Muhalli na Amfani da Waje na Hannun Robot
Kasuwancinmu
