HITBOT ELECTRIC GRIPPER SERIES – Z-EFG-50 Parallel Electric Gripper
Babban Kashi
Hannun mutum-mutumi na masana'antu / Haɗin gwiwar robot hannu / Electric gripper / mai fasaha mai hankali / mafita ta atomatik
Aikace-aikace
SCIC Z-EFG jerin robot grippers suna cikin ƙananan girman tare da ginanniyar tsarin servo, wanda ke ba da damar samun daidaitaccen iko na sauri, matsayi, da ƙarfi. SCIC yankan gefen gripping tsarin don sarrafa kansa zai ba ku damar buɗe sabbin dama don sarrafa ayyukan da ba ku taɓa tsammanin zai yiwu ba.
Siffar
● Daidaiton Ƙarfin Ƙarfin Ƙarfi, Mai Saurin danne Abubuwa masu Karɓa
● Madaidaicin Sarrafa Ƙarfi Mai Saurin Matsawa
● Mai Saurin Motsawa da Ƙunƙarar Matsewa
● Ƙananan Hoto, Mai dacewa don Haɗuwa
● Haɗe-haɗen Tuki da Mai Sarrafa Taushi mai laushi
● Hanyoyin sarrafawa da yawa Sauƙi don aiki
Modbus na iya sarrafa Ƙarfin, Bit da Gudu
Sauyawa Aikace-aikace
Gwajin faɗuwar maƙarƙashiya da fitowar gunduma.
Daidaito don Sarrafa
Jimlar bugun jini shine 50mm, Maimaitawa shine ± 0.02mm
Mai Sauƙi don Canji
Za'a iya canza wutsiya ta dace da buƙatu iri-iri
An Gina Mai Gudanarwa
Ƙananan rufe ɗakin, dace don haɗawa.
Yanayin Sarrafa
485 (Modbus RTU), I/O
Taushi mai laushi
Yana iya matse abubuwa masu rauni
Ƙayyadaddun Siga
| Samfura No. Z-EFG-50 | Ma'auni |
| Jimlar bugun jini | 50mm daidaitacce |
| Karfin kamawa | 15-50N daidaitacce |
| Maimaituwa | ± 0.02mm |
| Nau'in riko da aka ba da shawarar | 0.5kg |
| Yanayin watsawa | Gear Rack + Jagorar madaidaiciya |
| Man shafawa na abubuwa masu motsi | Kowane watanni shida ko motsi miliyan 1 / lokaci |
| Lokacin motsi bugun jini ta hanya ɗaya | 0.30s |
| Yanayin motsi | Yatsu biyu suna motsawa a kwance |
| Nauyi | 0.7kg |
| Girma (L*W*H) | 68*38*108mm |
| Wutar lantarki mai aiki | 24V± 10% |
| Ƙididdigar halin yanzu | 0.5A |
| Kololuwar halin yanzu | 2A |
| Ƙarfi | 12W |
| Ajin kariya | IP20 |
| Nau'in mota | Brushless DC |
| Yanayin zafin aiki | 5-55 ℃ |
| Yanayin zafi mai aiki | RH35-80 (Ba sanyi) |
| Halatta a tsaye lodi a tsaye | |
| Fz: | 200N |
| Ƙunƙarar da aka halatta | |
| Mx: | 1.6 nm |
| Nawa: | 1.2 nm |
| Mz: | 1.2 nm |
Daidaitaccen Ikon Ƙarfin Ƙarfi, Madaidaicin Maɗaukaki
Mai riƙe da wutar lantarki shine ɗaukar ƙirar watsawa ta musamman da diyya ta tuki, ƙarfi mai ƙarfi shine 15N-50N mai daidaitawa, kuma maimaitawarsa shine ± 0.02mm.
Saurin amsawa tare da Kwanciyar hankali
Mafi guntun bugun jini guda ɗaya shine kawai 0.2s, yana iya saduwa da babban sauri da kwanciyar hankali buƙatun layukan samarwa.
Ƙananan Hoto, Mai Sauƙi don Haɗuwa
Girman Z-EFG-50 shine L68 * W38 * H108mm, tsarinsa yana da ƙarfi, kuma yana tallafawa nau'ikan shigarwa sama da biyar masu sassauƙa, an gina mai sarrafa sa, yana ɗaukar ƙaramin sarari, mai sauƙin biyan buƙatun daban-daban na clamping. ayyuka.
Haɗaɗɗen Tuki da Mai Kulawa, Taushi mai laushi
Za a iya canza ɓangaren wutsiya na Z-EFG-50 cikin sauƙi, abokan ciniki za su iya matsa abubuwa bisa ga buƙatarsu, don tsara wutsiya da kansu, da kuma ci gaba da riƙe wutar lantarki ta iya kammala aikin matsawa mafi yawa.
Hanyoyin Gudanarwa da yawa, Sauƙi don Aiki
Z-EFG-50 gripper na lantarki yana da sauƙi don rarrabawa, yana da nau'o'in sarrafawa masu yawa: 485 (Modbus RTU), Pulse, I / O, mai jituwa tare da tsarin kulawa na PLC.
Load Center of Gravity Offset
Kasuwancinmu
