Jerin Gripper na Wutar Lantarki na HITBOT – Gripper na Wutar Lantarki na Z-EFG-30
Babban Rukuni
Hannun robot na masana'antu / Hannun robot na haɗin gwiwa / Riƙe wutar lantarki/Mai kunna fasaha/Mafita ta atomatik
Aikace-aikace
Na'urorin riƙe robot na SCIC Z-EFG suna da ƙananan girma tare da tsarin servo da aka gina a ciki, wanda ke ba da damar cimma daidaitaccen iko na gudu, matsayi, da ƙarfin matsewa. Tsarin riƙewa na SCIC na zamani don mafita na sarrafa kansa zai ba ku damar buɗe sabbin damammaki don yin ayyuka ta atomatik waɗanda ba ku taɓa tsammanin zai yiwu ba.
Fasali
· Mai sarrafawa a ciki
· Daidaita bugun jini da ƙarfin kamawa
· Yi amfani da injin servo
· Ana iya maye gurbin ƙarshen don daidaitawa da buƙatu daban-daban
· Ɗauki abubuwa masu rauni da nakasa kamar ƙwai, bututun gwaji, zobe, da sauransu.
· Yi amfani da yanayin da ba a sami iska ba (misali dakin gwaje-gwaje, asibiti)
Modbus zai iya sarrafa Ƙarfi, Bit da Speed
ninka aikace-aikacen
Gwajin matse kaka da kuma fitowar gunduma.
Daidaito ga Sarrafawa
Ana iya sarrafa ƙarfin, bit, da saurin ta hanyar Modbus
Tsawon Rai
Dubban miliyoyin da'ira,na'urar riƙe iska ta wuce gona da iri
An gina Mai Kulawa
Ƙaramin murfin ɗaki, mai dacewa don haɗawa.
Yanayin Sarrafa
485 (Modbus RTU), Pulse, I/O
Matsewa Mai Laushi
Yana iya manne abubuwa masu rauni
● Inganta juyin juya hali wajen maye gurbin na'urorin riƙe wutar lantarki ta hanyar amfani da na'urorin riƙe wutar lantarki, na farko da aka fara amfani da su ta hanyar amfani da na'urar servo a China.
● Cikakken maye gurbin matse iska + matattara + bawul ɗin solenoid + bawul ɗin matsewa + mai riƙe iska
● Tsawon rayuwar sabis na kekuna da yawa, daidai da silinda ta gargajiya ta Japan
Sigar Musamman
Z-EFG-30 na'urar riƙe wutar lantarki ce mai injin servo. Z-EFG-30 yana da injin haɗaka da na'urar sarrafawa, ƙarami a girma amma mai ƙarfi. Yana iya maye gurbin na'urorin riƙe iska na gargajiya da kuma adana sararin aiki mai yawa.
● Ƙaramin na'urar riƙe wutar lantarki mai ƙarfi amma mai ƙarfi ta injin servo.
● Ana iya maye gurbin tashoshi don biyan buƙatun aiki daban-daban.
● Zai iya ɗaukar abubuwa masu rauni da nakasa, kamar ƙwai, bututun gwaji, zobba, da sauransu.
● Ya dace da wuraren da ba su da hanyoyin iska (kamar dakunan gwaje-gwaje, da asibitoci).
An tsara na'urar riƙe wutar lantarki don ɗaukar ƙirar watsawa ta musamman da kuma diyya ta lissafin tuƙi, ƙarfin ɗaurewa yana da 10N-40N mai daidaitawa akai-akai, kuma maimaituwa shine ±0.02mm. Gajeren bugun guda ɗaya shine 0.2s kawai, yana iya biyan buƙatun matsewa mai sauri da kwanciyar hankali na layin samarwa. Ana iya canza ɓangaren wutsiya na Z-EFG-30 cikin sauƙi, abokan ciniki za su iya manne abubuwan bisa ga buƙatarsu, don tsara wutsiyar da kansu, da kuma kiyaye na'urar riƙe wutar lantarki ta iya kammala aikin matsewa a mafi yawan lokuta.
| Lambar Samfura Z-EFG-30 | Sigogi |
| Jimlar bugun jini | 30mm mai daidaitawa |
| Ƙarfin riƙewa | 10-40N mai daidaitawa |
| Maimaitawa | ±0.2mm |
| Nauyin riƙewa da aka ba da shawarar | ≤0.4kg |
| Yanayin watsawa | Rakin gear + jagorar layi |
| Cika mai na abubuwan da ke motsawa | Duk wata shida ko motsi miliyan 1 / lokaci |
| Lokacin motsi na bugun hanya ɗaya | 0.20s |
| Yanayin motsi | Yatsu biyu suna motsawa a kwance |
| Nauyi | 0.55kg |
| Girma (L*W*H) | 52*38*108mm |
| Ƙarfin wutar lantarki na aiki | 24V ± 10% |
| Matsayin halin yanzu | 0.5A |
| Matsakaicin wutar lantarki | 1A |
| Ƙarfi | 12W |
| Ajin kariya | IP20 |
| Nau'in mota | Ba tare da gogewa ba na DC |
| Matsakaicin zafin aiki | 5-55℃ |
| Tsarin zafi na aiki | RH35-80 (Babu sanyi) |
| Loda mai daidaituwa a tsaye | |
| Fz: | 200N |
| Juyin juyi mai izini | |
| Mx: | 1.6 Nm |
| Nawa: | 1.2 Nm |
| Mz: | 1.2 Nm |
Daidaiton Ƙarfin Daidaito, Babban Daidaito
An tsara na'urar riƙe wutar lantarki don amfani da ƙirar watsawa ta musamman da kuma lissafin tuƙi, ƙarfin matsewa shine 10N-4ON mai daidaitawa akai-akai, kuma maimaituwa shine +0.02mm.
Saurin Amsawa da Kwanciyar Hankali
Mafi gajarta bugun ɗaya shine 0.2s kawai, yana iya kaiwa ga tsayin dakababban gudu da kwanciyar hankali na buƙatar layin samarwa.
Ƙaramin Siffa, Mai Sauƙin Haɗawa
Girman Z-EFG-30 shine L52*W38*H108mm, tsarinsa yana da ƙanƙanta, kuma yana tallafawa nau'ikan shigarwa masu sassauƙa sama da biyar, mai sarrafa shi an gina shi a ciki, yana mamaye ƙaramin sarari, mai sauƙin biyan buƙatun ayyuka daban-daban na mannewa.
Haɗaɗɗen Tuki da Mai Gudanarwa, Matsewa Mai Taushi
Ana iya canza ɓangaren wutsiyar Z-EFG-30 cikin sauƙi, abokan ciniki za su iya manne abubuwan bisa ga buƙatarsu, don tsara wutsiyar da kansu, da kuma kiyaye na'urar riƙe wutar lantarki ta iya kammala aikin mannewa a mafi yawan lokuta.
Load Center of Gravity Offset
Tambayoyin da ake yawan yi akai-akai
1. Akwai buƙatar daidaita juyawa, don haka lokacin da ɓangarorin biyu na riƙon suka kusa, shin yana tsayawa a matsayi na tsakiya a kowane lokaci?
Amsa: Eh, akwai kuskuren daidaito na <0.1mm, kuma maimaitawa shine ±0.02mm.
2. Shin abin riƙewa ya haɗa da ɓangaren kayan haɗin?
Amsa: A'a. Masu amfani suna buƙatar tsara sashin kayan aikinsu bisa ga ainihin abubuwan da aka manne. Bugu da ƙari, Hitbot yana ba da wasu ɗakunan karatu na kayan aikin, da fatan za a tuntuɓi ma'aikatanmu don ƙarin bayani.
3. Ina mai sarrafa tuƙi yake kuma shin ina buƙatar ƙarin kuɗi don hakan?
Amsa: An gina shi a ciki, babu ƙarin caji, adadin riƙon ya riga ya haɗa da farashin mai sarrafawa.
4. Shin zai yiwu a yi motsi da yatsa ɗaya?
Amsa: A'a, har yanzu ana ci gaba da haɓaka na'urorin riƙewa na yatsu ɗaya, da fatan za a tuntuɓi ma'aikatanmu don ƙarin bayani.
5. Menene saurin aiki na Z-EFG-30?
Amsa: Z-EFG-30 yana ɗaukar 0.2s don cikakken bugun gaba a hanya ɗaya da kuma 0.4s don tafiya ta dawowa.
Kasuwancinmu
