Jerin Gripper na Wutar Lantarki na HITBOT – Gripper na Wutar Lantarki na Z-EFG-20P
Babban Rukuni
Hannun robot na masana'antu / Hannun robot na haɗin gwiwa / Riƙe wutar lantarki/Mai kunna fasaha/Mafita ta atomatik
Aikace-aikace
Na'urorin riƙe robot na SCIC Z-EFG suna da ƙananan girma tare da tsarin servo da aka gina a ciki, wanda ke ba da damar cimma daidaitaccen iko na gudu, matsayi, da ƙarfin matsewa. Tsarin riƙewa na SCIC na zamani don mafita na sarrafa kansa zai ba ku damar buɗe sabbin damammaki don yin ayyuka ta atomatik waɗanda ba ku taɓa tsammanin zai yiwu ba.
Fasali
● Daidaiton Ƙarfin Aiki, Ya dace da buƙatar matsewa a ƙaramin yanki.
● Babban Ƙarfin Matsewa, Daidaiton Ƙarfin
● Yanayin Canji da Daidaitawar Stroke
● Tsarin da ya yi ƙanƙanta, mai sassauƙa don shigarwa.
● An haɗa Drive da Controller don tallafawa Taɓawa Mai Taushi.
Modbus zai iya sarrafa Ƙarfi, Bit da Speed
Babban Ƙarfin Matsewa
Jimlar bugun jini shine 20mm, ƙarfin matsewa shine 30-80N
Kula da Daidaito
Maimaitawa shine ±0.02mm
Tsawon Rai
Dubban miliyoyin zagayowar,bayan na'urar riƙe iska
Jimlar bugun jini
Mafi ƙarancin lokacin bugun jini shine 0.40s.
Yanayin Sarrafa
485, Shigarwa da Fitarwa ta I/O
Yanayin Motsi
Motsi Mai Layi Daya
● Inganta juyin juya hali wajen maye gurbin na'urorin riƙe wutar lantarki ta hanyar amfani da na'urorin riƙe wutar lantarki, na farko da aka fara amfani da su ta hanyar amfani da na'urar servo a China.
● Cikakken maye gurbin matse iska + matattara + bawul ɗin solenoid + bawul ɗin matsewa + mai riƙe iska
● Tsawon rayuwar sabis na kekuna da yawa, daidai da silinda ta gargajiya ta Japan
Sigar Musamman
| Lambar Samfura Z-EFG-20P | Sigogi |
| Jimlar bugun jini | 20mm mai daidaitawa |
| Ƙarfin riƙewa | 30-80N mai daidaitawa |
| Maimaitawa | ±0.02mm |
| Nauyin riƙewa da aka ba da shawarar | ≤0.8kg |
| Yanayin watsawa | Jagorar rakin gear + Gilashin giciye |
| Cika mai na abubuwan da ke motsawa | Duk wata shida ko motsi miliyan 1 / lokaci |
| Lokacin motsi na bugun hanya ɗaya | 0.40s |
| Yanayin motsi | Yatsu biyu suna motsawa a kwance |
| Nauyi | 0.46kg |
| Girma (L*W*H) | 44*30*124.7mm |
| Ƙarfin wutar lantarki na aiki | 24V ± 10% |
| Matsayin halin yanzu | 0.2A |
| Matsakaicin wutar lantarki | 1A |
| Ƙarfi | 5W |
| Ajin kariya | IP20 |
| Nau'in mota | Ba tare da gogewa ba na DC |
| Matsakaicin zafin aiki | 5-55℃ |
| Tsarin zafi na aiki | RH35-80 (Babu sanyi) |
| Loda mai daidaituwa a tsaye | |
| Fz: | 150N |
| Juyin juyi mai izini | |
| Mx: | 2.1 Nm |
| Nawa: | 2.34 Nm |
| Mz: | 2 Nm |
Babban Ƙarfin Matsewa, Daidaiton Ƙarfin
Na'urar riƙe wutar lantarki ta Z-EFG-20P za ta yi amfani da ƙirar watsawa ta musamman da kuma diyya ta hanyar amfani da algorithm, ƙarfin matsewarta yana da 30-80N wanda za a iya daidaitawa, jimillar bugun shine 20mm, kuma maimaituwa shine ±0.02mm.
Yanayin Dynamic da Stroke Ana iya Daidaitawa
Yanayin motsi na na'urar riƙe wutar lantarki yana da yatsu 2 daidai da mafi ƙarancin lokacin bugun guda ɗaya shine 0.40s kawai, nauyin matsewa shine ≤0.8kg, yana iya biyan buƙatar matsewa don samar da ingantaccen aiki.
Tsarin Karami, Mai Sauƙi a Shigarwa.
Girman Z-EFG-20P shine L44*W30*H124.7mm, tsarinsa yana da ƙanƙanta, don tallafawa sama da yanayin shigarwa guda 5, mai sarrafa shi an gina shi a ciki, ƙaramin ɗaki yana mamaye shi, yana iya zama mai sauƙin magance ayyuka daban-daban na ɗaurewa.
An haɗa Drive da Controller, don tallafawa Taɓawa Mai Taushi.
Ana iya canza ɓangaren wutsiya na Z-EFG-20P cikin sauƙi, abokin ciniki zai iya tsara ɓangaren wutsiya bisa ga abubuwan da suke ɗaurewa, don tabbatar da cewa mai riƙe wutar lantarki yana kammala ayyukan ɗaurewa a mafi girman matsayi.
Load Center of Gravity Offset
Kasuwancinmu
