Jerin Gripper na Wutar Lantarki na HITBOT – Gripper na Wutar Lantarki na Z-EFG-20F
Babban Rukuni
Hannun robot na masana'antu / Hannun robot na haɗin gwiwa / Riƙe wutar lantarki/Mai kunna fasaha/Mafita ta atomatik
Aikace-aikace
Na'urorin riƙe robot na SCIC Z-EFG suna da ƙananan girma tare da tsarin servo da aka gina a ciki, wanda ke ba da damar cimma daidaitaccen iko na gudu, matsayi, da ƙarfin matsewa. Tsarin riƙewa na SCIC na zamani don mafita na sarrafa kansa zai ba ku damar buɗe sabbin damammaki don yin ayyuka ta atomatik waɗanda ba ku taɓa tsammanin zai yiwu ba.
Fasali
● Daidaitowar Ƙarfin Aiki, Saurin Matse Abubuwa Masu Rauni
● Daidaitaccen Ikon Sarrafa Sauri Don Mannewa
● Saurin Motsawa da Rage Ragewa
● Ƙaramin Siffa, Mai Sauƙin Haɗawa
● Haɗaɗɗen Tuki da Mai Kulawa Mai Sauƙi
● Yanayin Sarrafawa da yawa Masu Sauƙin Aiki
Modbus zai iya sarrafa Ƙarfi, Bit da Speed
Saurin Buɗewa/Rufewa
Lokacin motsi na bugun jini ɗaya shine 0.1s
Ƙaramin Girma
Girman sa shine 52*32*103mm
Babban Ikon Ƙarfin da Ya Kamata
±0.3N Babban ƙarfin da aka ƙayyade, ƙarfin shine 1-8N.
An gina Mai Kulawa
Ƙaramin ɗaki yana zama, mai sauƙin haɗawa
Yanayin Sarrafa
Don tallafawa 485 (Modbus RTU) da kuma I/O Control
Matsewa Mai Laushi
Yana iya manne abubuwa masu rauni
● Inganta juyin juya hali wajen maye gurbin na'urorin riƙe wutar lantarki ta hanyar amfani da na'urorin riƙe wutar lantarki, na farko da aka fara amfani da su ta hanyar amfani da na'urar servo a China.
● Cikakken maye gurbin matse iska + matattara + bawul ɗin solenoid + bawul ɗin matsewa + mai riƙe iska
● Tsawon rayuwar sabis na kekuna da yawa, daidai da silinda ta gargajiya ta Japan
Sigar Musamman
| Lambar Samfura Z-EFG-20F | Sigogi |
| Jimlar bugun jini | 20mm mai daidaitawa |
| Ƙarfin riƙewa | 1-8N mai daidaitawa |
| Maimaitawa | ±0.02mm |
| Nauyin riƙewa da aka ba da shawarar | ≤0.1kg |
| Yanayin watsawa | Rakin gear + jagorar layi |
| Cika mai na abubuwan da ke motsawa | Duk wata shida ko motsi miliyan 1 / lokaci |
| Lokacin motsi na bugun hanya ɗaya | 0.1s |
| Yanayin motsi | Yatsu biyu suna motsawa a kwance |
| Nauyi | 0.5kg |
| Girma (L*W*H) | 52*32*103mm |
| Ƙarfin wutar lantarki na aiki | 24V ± 10% |
| Matsayin halin yanzu | 0.4A |
| Matsakaicin wutar lantarki | 1A |
| Ƙarfi | 10W |
| Ajin kariya | IP20 |
| Nau'in mota | Ba tare da gogewa ba na DC |
| Matsakaicin zafin aiki | 5-55℃ |
| Tsarin zafi na aiki | RH35-80 (Babu sanyi) |
| Loda mai daidaituwa a tsaye | |
| Fz: | 120N |
| Juyin juyi mai izini | |
| Mx: | 0.6 Nm |
| Nawa: | 1 Nm |
| Mz: | 1 Nm |
Daidaitaccen Ikon Sarrafa Sauri Don Matsawa
Na'urar riƙe wutar lantarki ta Z-EFG-20F za ta ɗauki tsarin watsawa na musamman da kuma diyya ta hanyar amfani da algorithm, jimlar bugunsa ya kai 20mm, ƙarfin matsewa shine 1-8N.
Saurin Motsawa da Rage Ragewa
Kauri na wannan na'urar riƙe wutar lantarki shine 32mm kawai, nisan da ke tsakanin ɓangarorin biyu na baya shine 0.1s kawai, yana iya haɗuwa don samarwa a cikin ƙaramin sarari, mai sauri da kwanciyar hankali don mannewa.
Ƙaramin Siffa, Mai Sauƙin Haɗawa
Girman Z-EFG-20F shine L52*W32*H103mm, tsarinsa yana da ƙanƙanta, don tallafawa hanyoyin shigar da sassauƙa masu yawa, mai sarrafa shi an gina shi a ciki, ƙaramin ɗaki yana mamaye shi, wanda zai iya zama mai sauƙin magance ayyuka daban-daban na ɗaurewa.
Haɗaɗɗen Tuki da Mai Kula da Taushi Mai Sauƙi
Ana iya sarrafa ƙarfin matsewa, bit da saurinsa, ana iya canza matsewar wutsiya cikin sauƙi, abokin ciniki zai iya matse abubuwan da yake buƙata, don tsara matsewar wutsiya, da kuma kiyaye matsewar lantarki don kammala aikin matsewa a mafi girman matakin.
Yanayin Sarrafawa da yawa Mai Sauƙin Aiki
Tsarin gripper na lantarki na Z-EFG-20F abu ne mai sauƙi, yana da hanyoyi masu yawa na sarrafawa, don tallafawa 485 (Modbus RTU) da kuma sarrafa bas na I/O, kawai kuna buƙatar kebul ɗaya, ana iya gyara shi kuma software zai iya amfani da shi.
Load Center of Gravity Offset
Kasuwancinmu
