Jerin Gripper na Wutar Lantarki na HITBOT – Gripper na Wutar Lantarki na Z-EFG-20
Babban Rukuni
Hannun robot na masana'antu / Hannun robot na haɗin gwiwa / Riƙe wutar lantarki/Mai kunna fasaha/Mafita ta atomatik
Aikace-aikace
Na'urorin riƙe robot na SCIC Z-EFG suna da ƙananan girma tare da tsarin servo da aka gina a ciki, wanda ke ba da damar cimma daidaitaccen iko na gudu, matsayi, da ƙarfin matsewa. Tsarin riƙewa na SCIC na zamani don mafita na sarrafa kansa zai ba ku damar buɗe sabbin damammaki don yin ayyuka ta atomatik waɗanda ba ku taɓa tsammanin zai yiwu ba.
Fasali
· Mai sarrafawa a ciki
· Daidaita bugun jini da ƙarfin kamawa
· Ana iya maye gurbin ƙarshen don daidaitawa da buƙatu daban-daban
· Ɗauki abubuwa masu rauni da nakasa kamar ƙwai,bututun gwaji, zobba, da sauransu.
· Yi amfani da yanayin da ba a sami iska ba (misali dakin gwaje-gwaje, asibiti)
Daidaito don Sarrafawa, don Mannewa a Ƙaramin Wuri Mai Sauri da Tsantsarwa don Mannewa
Babban Ƙarfin Matsewa
Jimlar bugun jini shine 20mm, ƙarfin matsewa shine 80N.
Daidaito ga Sarrafawa
Maimaitawa: ±0.02mm
Tsawon Rai
Dubban miliyoyin kekuna, bayan na'urar riƙe iska
An gina Mai Kulawa
Ƙaramin sarari yana mamaye, mai sauƙin haɗawa.
Yanayin Sarrafa
Pulse, I/O masu kula don zaɓi
Matsewa Mai Laushi
Yana iya manne abubuwa masu rauni
Sigar Musamman
| Lambar Samfura Z-EFG-20 | Sigogi |
| Jimilla bugun jini | 20mm |
| Ƙarfin riƙewa | 30~80N |
| Maimaitawa | ±0.02mm |
| Nauyin riƙewa da aka ba da shawarar | 0.8kg |
| Watsawa yanayin | Jagorar rakin gear + jagorar na'urar birgima |
| Cika mai na abubuwan da ke motsawa | Duk wata shida ko motsi miliyan 1 / lokaci |
| Lokacin motsi na bugun hanya ɗaya | 0.45s |
| Matsakaicin zafin aiki | 5-55℃ |
| Tsarin zafi na aiki | RH35-80(Babu sanyi） |
| Yanayin motsi | Yatsu biyu suna motsawa a kwance |
| Kula da bugun jini | Ana iya daidaitawa |
| Daidaita ƙarfin matsewa | Ana iya daidaitawa |
| Nauyi | 0.458kg |
| Girma(L*W*H） | 44*30*124.7mm |
| Sanya Mai Kulawa | Gina-ciki |
| Ƙarfi | 5W |
| Nau'in mota | Ba tare da gogewa ba na DC |
| Kololuwar Wutar Lantarki | 1A |
| Ƙarfin wutar lantarki mai ƙima | 24V |
| Tsarin aiki na yanzu | 0.2A |
| Juriya ga tasiri / juriya ga girgiza | 98m/s |
| Diamita na injin | 28mm |
* Ƙarfin riƙewa na Z-EFG-20: Ana iya daidaita ƙarfin riƙewa ta hanyar ƙara kayan nakasa mai sarrafawa a gaban kayan aikin, wanda aka samu bisa ga lanƙwasa na nakasawa da ƙarfi da ya dace.
| Loda mai daidaituwa a tsaye | |
| Fz: | 150N |
| Juyin juyi mai izini | |
| Mx: | 2.1 Nm |
| Nawa: | 2.34 Nm |
| Mz: | 2 Nm |
Babban Ƙarfin Matsewa, Daidaiton Ƙarfin
An yi amfani da na'urar riƙe wutar lantarki ta musamman don ƙirƙirar tsarin watsawa da kuma lissafin tuƙi, ƙarfin matsewa yana da 80N wanda za'a iya daidaitawa akai-akai, jimlar bugun shine 20mm, maimaituwa shine ±0.02mm.
Yanayin Motsi da Daidaitawar Bugawa
Motsin gripper na lantarki ya shafi motsi mai yatsu biyu a layi ɗaya, mafi ƙarancin lokacin bugunsa guda ɗaya shine 0.45s kawai, yana ɗaukar nauyin ≤0.8Kg, yana iya biyan buƙatun matsewa mai ƙarfi don layin samarwa.
Tsarin Karami, Mai Sauƙi a Shigarwa.
Girman Z-EFG-20 shine L40*W30*H124.7mm, tsarinsa yana da ƙanƙanta, yana tallafawa fiye da yanayin shigarwa guda biyar, mai sarrafa shi an gina shi a ciki, yana ɗaukar ƙaramin sarari, wanda zai iya zama mai sauƙin aiwatar da ayyuka daban-daban na mannewa.
Haɗakar Tuki da Mai Gudanarwa, Matsawa Mai Taushi
Ana iya canza wutsiyar Z-EFG-20 cikin sauƙi, abokan ciniki za su iya manne abubuwan da suke buƙata, don tsara wutsiyar, da kuma riƙe na'urar riƙe wutar lantarki don kammala ayyukan mannewa a mafi girman matakin.
Tsarin Shigarwa na Girma
① Motsa yatsun hannun mai riƙewa
② Matsayin hawa gefe (ramin da aka zana)
③ Wurin wayoyi na soket na jirgin sama
④ Matsayin ƙarfin daidaita riƙo (hagu) da hasken nuni (dama)
⑤ Matsayin shigarwa na gripper (rami mai zare)
⑥ Matsayin shigarwa na gripper (ramin fil)
⑦ Matsayin hawa ƙasa (ramin fil)
⑧ Matsayin hawa ƙasa ((ramin zare)
Kasuwancinmu
