HITBOT ELECTRIC GRIPPER SERIES – Z-ECG-20 Gripper Mai Yatsu Uku
Babban Kashi
Hannun mutum-mutumi na masana'antu / Haɗin gwiwar robot hannu / Electric gripper / mai fasaha mai hankali / mafita ta atomatik
Aikace-aikace
Siffar
·Gane juzu'i na manne, aikin fitar da yanki
·Ƙarfi, matsayi, saurin sarrafawa, daidaitaccen iko ta Modbus
·Tsaki mai yatsa uku
·Mai sarrafawa mai ginawa: ƙananan sawun ƙafa, haɗin kai mai sauƙi
·Yanayin sarrafawa: 485 (Modbus RTU), I/O
Gripper-Jaw Uku Mai Sauƙi don Damke Abubuwan Silinda
Babban Ayyuka
Ƙarfin Ƙarfi: 30-80N,
Babban Yawan Makamashi
Babban bugun jini
Jimlar bugun jini: 20mm (daidaitacce)
Daidaiton Gudanarwa
Modbus ne ke sarrafa shi
An Gina Mai Gudanarwa
Ƙananan murfin yanki, mai sauƙin haɗawa.
Fast da High inganci
Maimaituwa: ± 0.03mm,
Juyin Halitta: 0.5s
3-Gwargwadon jaki
3-jaw don matsawa, dace da lokuta daban-daban
Ƙayyadaddun Siga
| Samfura No. Z-ECG-20 | Ma'auni |
| Jimlar bugun jini | 20mm (Mai daidaitawa) |
| Karfin kamawa | 30-80N (Mai daidaitawa) |
| Maimaituwa | ± 0.03mm |
| Nau'in riko da aka ba da shawarar | Max. 1 kg |
| Watsawa yanayin | Rack da Pinion + Rail Jagoran Kwallon |
| Man shafawa na abubuwa masu motsi | Kowane watanni shida ko motsi miliyan 1 / lokaci |
| Lokacin motsi bugun jini ta hanya ɗaya | 0.5s ku |
| Yanayin zafin aiki | 5-55 ℃ |
| Yanayin zafi mai aiki | Saukewa: RH35-80(Babu sanyi) |
| Mafi qarancin lokacin bugun jini ɗaya | 0.5s ku |
| Sarrafa bugun jini | Daidaitacce |
| Daidaita ƙarfi da ƙarfi | Daidaitacce |
| Nauyi | 1.5kg |
| Girma(L*W*H) | 114*124.5*114mm |
| Babban darajar IP | IP54 |
| Nau'in mota | Servo Motor |
| Kololuwar Yanzu | 2A |
| Ƙarfin wutar lantarki | 24V ± 10% |
| Yanayin jiran aiki | 0.8A |
| Halatta a tsaye lodi a tsaye | |
| Fz: | 150N |
| Ƙunƙarar da aka halatta | |
| Mx: | 1.5 nm |
| Nawa: | 1.5 nm |
| Mz: | 1.5 nm |
Daidaito Zuwa Matsayi, Gripper Mai Yatsa Uku
3-jaw grippers na lantarki yana da maimaitawa na ± 0.03mm, don ɗaukar maƙallan muƙamuƙi uku, yana da aikin gwajin juzu'i, fitowar sashe, wanda zai iya zama mafi kyau don magance aikin ƙulla abubuwa na Silinda.
Mai sarrafawa Ginawa, Babban Haɗin kai
An daidaita bugun jini na 20mm, ƙwanƙwasa ƙarfi shine 30-80N daidaitacce, shine don amfani da hanyoyin watsawa na Gear rack + dogo mai jagorar ƙwallon ƙwallon ƙafa, an gina shi mai sarrafawa = ciki, clamping ƙarfi da sauri ana iya sarrafa shi.
Ƙananan Girma, Mai Sauƙi don Shigarwa
Girman Z-ECG-20 shine L114 * W124.5 * H114mm, nauyi shine kawai 0.65kg, ƙaramin tsari ne, haɓaka nau'ikan shigarwa, mai sauƙi don ma'amala da ayyuka daban-daban.
Saurin amsawa, Daidaiton Ƙarfin Ƙarfi
Mai riƙe da wutar lantarki yana da aikin ƙaddamar da gwajin juzu'i da fitowar sashe, nauyin sa shine 1.5kg, mai hana ruwa ruwa shine IP20, nauyin ƙaddamar da shawarwarin shine ≤1kg, yana iya gane ainihin madaidaicin matsewa.
Haɓaka Hanyoyin Gudanarwa, Sauƙi don Aiki
Z-ECG-20 gripper na lantarki na iya zama daidaiton sarrafawa ta Modbus, daidaitawar gripper yana da sauƙi, don amfani da ka'idar Digital I / O, kawai buƙatar kebul ɗaya don haɗa ON / KASHE, kuma yana dacewa da tsarin kulawa na PLC.
Load Center of Gravity Offset
Kasuwancinmu
