CNC Juya Cibiyar Haɗin gwiwar Robot Arm 6 Axis High Quality Robotic Arm Loading and Unloading Screwing

Takaitaccen Bayani:

SCIC Z-Arm 2442 an tsara shi ta SCIC Tech, mutum-mutumi na haɗin gwiwa mara nauyi, mai sauƙin shiri da amfani, yana tallafawa SDK. Bugu da kari, yana da goyan bayan gano karo, wato, zai zama atomatik don tsayawa lokacin taɓa ɗan adam, wanda ke da haɗin gwiwar injin mutum da injin, tsaro yana da girma.


  • Z axis bugun jini:240mm (tsawo za a iya musamman)
  • Gudun linzamin kwamfuta:1255.45mm/s (nauyin kaya 1.5kg) 1023.79mm/s (nauyin kaya 2kg)
  • Maimaituwa:± 0.03mm
  • Madaidaicin kaya:2kg
  • Matsakaicin kaya:3kg
  • Cikakken Bayani

    Tags samfurin

    CNC Juya Cibiyar Haɗin gwiwar Robot Arm 6 Axis High Quality Robotic Arm Loading and Unloading Screwing

    Babban Kashi

    Hannun mutum-mutumi na masana'antu / Haɗin gwiwar robot hannu / Electric gripper / mai fasaha mai hankali / mafita ta atomatik

    Aikace-aikace

    SCIC Z-Arm cobots suna da nauyi 4-axis robots haɗin gwiwa tare da injin tuƙi da aka gina a ciki, kuma ba sa buƙatar masu ragewa kamar sauran scara na gargajiya, suna rage farashin da kashi 40%. SCIC Z-Arm cobots na iya gane ayyuka ciki har da amma ba'a iyakance ga bugu na 3D ba, sarrafa kayan aiki, walda, da zanen Laser. Yana da ikon haɓaka inganci da sassaucin aikinku da samarwa.

    Gabatar da sabon sabbin abubuwanmu a fagen sarrafa kansa na masana'antu - zaɓin masana'antu da sanya Scara robot 4-axis babban gudun. An ƙera wannan na'ura mai kaifi don sauya yadda ake sarrafa kayayyaki da sarrafa su a filin masana'anta.

    Hannun mutum-mutumin yana da na'ura mai nauyin nauyin 10kg da aka keɓance kuma ya dace da ayyukan da suka fara tun daga haɗuwa da marufi zuwa sarrafa kayan aiki da kula da injin. Tsarinsa na axis 4 yana ba da damar santsi, daidaitaccen motsi, yana tabbatar da iyakar inganci da daidaito a duk ayyukan.

    Daya daga cikin fitattun abubuwan da na'urar robot din ke da ita ita ce karfinsa mai saurin gaske. Tare da saurin zagayowar zagayowar wuri da wuri, wannan na'ura na iya haɓaka haɓaka aiki da kayan aiki sosai, yana mai da shi kadara mai mahimmanci ga kowane aikin masana'anta.

    Karamin mai kula da shi wani haske ne na wannan injin mai sarrafa kansa. Ƙaƙƙarfan girmansa da haɗin gwiwar mai amfani yana ba shi sauƙi don tsarawa da aiki, yayin da yake ba da ayyuka na ci gaba da zaɓuɓɓukan gyare-gyare. Tare da ƙaramin mai sarrafawa, masu amfani suna da cikakken iko akan motsi na hannun mutum-mutumi kuma suna iya daidaita saitunan cikin sauƙi don biyan takamaiman buƙatun samarwa.

    Baya ga iyawar fasaharsa, an ƙera wannan hannu na mutum-mutumi tare da dorewa da aminci a zuciya. An yi shi daga kayan aiki masu inganci da ingantattun kayan aikin injiniya, an ƙera shi don tsayayya da ƙaƙƙarfan amfani da masana'antu kuma yana aiki ba tare da matsala ba a cikin yanayin samar da ƙalubale.

    Lokacin da nauyi mai nauyi da maimaita ayyuka suna buƙatar sarrafa sauri da daidai, zaɓin masana'antar mu da sanya Scara robot 4-axis babban gudun shine cikakkiyar mafita. Ko kuna son daidaita layin samar da ku, haɓaka samarwa ko haɓaka amincin wurin aiki, wannan injin mai sarrafa kansa tabbas zai ba da sakamako mafi girma.

    Kware da makomar sarrafa kansa na masana'antu kuma ku ɗauki ayyukan masana'antar ku zuwa mataki na gaba tare da sabbin makaman mu na robotic.

    Siffofin

    Haɗin gwiwar robotic hannu 2442

    Babban Madaidaici
    Maimaituwa
    ± 0.03mm

    Babban kaya
    3kg

    Manyan Hannun Hannu
    JI axis 220mm
    J2 axis 200mm

    Farashin farashi
    Ingancin matakin masana'antu
    Cm farashin

    Ƙayyadaddun Siga

    SCIC Z-Arm 2442 an tsara shi ta SCIC Tech, mutum-mutumi na haɗin gwiwa mara nauyi, mai sauƙin shiri da amfani, yana tallafawa SDK. Bugu da kari, yana da goyan bayan gano karo, wato, zai zama atomatik don tsayawa lokacin taɓa ɗan adam, wanda ke da haɗin gwiwar injin mutum da injin, tsaro yana da girma.

    Z-Arm 2442 Robot Haɗin gwiwa

    Ma'auni

    Tsawon hannun axis 1

    mm 220

    1 kusurwar juyawa axis

    ±90°

    Tsawon hannun axis 2

    200mm

    2 kusurwar juyawa axis

    ± 164°

    Z axis bugun jini

    210mm (tsawo za a iya musamman)

    kewayon juyawa axis

    ± 1080°

    Gudun linzamin kwamfuta

    1255.45mm/s (nauyin kaya 1.5kg)

    1023.79mm/s (nauyin kaya 2kg)

    Maimaituwa

    ± 0.03mm

    Daidaitaccen kaya

    2kg

    Matsakaicin kaya

    3kg

    Digiri na 'yanci

    4

    Tushen wutan lantarki

    220V/110V50-60HZ daidaitawa zuwa 24VDC mafi girman ƙarfin 500W

    Sadarwa

    Ethernet

    Faɗawa

    Gina mai haɗaɗɗen mai sarrafa motsi yana ba da 24 I/O + faɗaɗa ƙarƙashin hannu

    Za a iya daidaita axis Z-axis a tsayi

    0.1m-1m

    Z-axis jan koyarwa

    /

    An tanadar da haɗin wutar lantarki

    Daidaitaccen daidaitawa: 24 * 23awg (marasa kariya) wayoyi daga sashin soket ta hannun murfin ƙasa

    Zabin: 2 φ4 injin bututu ta hanyar soket panel da flange

    Masu daidaita wutar lantarki na HITBOT

    T1: daidaitaccen tsarin I / O, wanda za'a iya daidaita shi zuwa Z-EFG-8S/Z-EFG-12/Z-EFG-20/ Z-EFG-30

    T2: nau'in I/O yana da 485, wanda za'a iya haɗa shi da masu amfani da Z-EFG-100/Z-EFG-50 kuma wasu suna buƙatar sadarwar 485

    Hasken numfashi

    /

    Kewayon motsi na hannu na biyu

    Daidaitaccen: ± 164° Na zaɓi: 15-345deg

    Na'urorin haɗi na zaɓi

    /

    Amfani da muhalli

    Yanayin yanayi: 0-55°C Humidity: RH85 (ba sanyi)

    shigarwar dijital tashar tashar I/O (keɓe)

    9+3+ tsawo na hannun gaba (na zaɓi)

    Fitowar dijital ta tashar I/O (keɓe)

    9+3+ tsawo na hannun gaba (na zaɓi)

    Shigar da tashar tashar tashar tashar I/O (4-20mA)

    /

    I/O tashar analog fitarwa (4-20mA)

    /

    Tsawon hannun Robot

    mm 596

    Nauyin hannu na Robot

    240mm bugun jini net nauyi 19kg

    Girman tushe

    200mm*200*10mm

    Nisa tsakanin ramukan gyara tushe

    160mm * 160mm tare da hudu M8 * 20 sukurori

    Gano karo

    Jawo koyarwa

    Motion Range M1 Version (Juyawa waje)

    haɗin gwiwar robotic hannu
    mutum-mutumi

    Gabatarwar Interface

    An shigar da ƙirar hannu na robot Z-Arm 2442 a wurare 2, gefen tushen hannun robot (wanda aka bayyana a matsayin A) da kuma bayan hannun ƙarshen. Ƙungiyar mu'amala a A tana da ikon canza wutar lantarki (JI), 24V ikon samar da wutar lantarki DB2 (J2), fitarwa zuwa mai amfani I/O tashar jiragen ruwa DB15 (J3), shigar da mai amfani I/O tashar jiragen ruwa DB15 (J4) da maɓallin daidaitawar adireshin IP. (K5). Ethernet tashar jiragen ruwa (J6), tsarin shigarwa / fitarwa tashar jiragen ruwa (J7), da biyu 4-core madaidaiciya-ta wayoyi soket J8A da J9A.

    Matakan kariya

    1. Ƙaddamarwa rashin aiki

    Ana nuna cibiyar ɗaukar nauyin nauyi na nauyi da kewayon ƙimar da aka ba da shawarar tare da inertia motsi na axis a cikin hoto 1.

    Robotic Arm na Masana'antu - Z-Arm-1832 (6)

    Hoto1 XX32 jerin jigilar kaya bayanin

    2. Karfin karo
    Ƙarfin haɓakar kariya ta haɗin gwiwa a kwance: ƙarfin jerin XX42 shine 40N.

    3. Z-axis ƙarfin waje
    Ƙarfin waje na axis Z ba zai wuce 120N ba.

    Masana'antu-Robotic-Arm-Z-Arm-1832-71

    Hoto 2

    4. Bayanan kula don shigarwa na musamman Z axis, duba Hoto 3 don cikakkun bayanai.

    Robotic Arm na Masana'antu - Z-Arm-1832 (8)

    Hoto 3

    Bayanan Gargaɗi:

    (1) Don ƙirar Z-axis da aka keɓance tare da babban bugun jini, Rigidity Z-axis yana raguwa yayin da bugun jini ya karu. Lokacin da bugun jini na Z-axis ya wuce ƙimar da aka ba da shawarar, mai amfani yana da ƙaƙƙarfan buƙatun, kuma saurin shine> 50% na matsakaicin matsakaicin, ana ba da shawarar sosai don shigar da tallafi a bayan axis na Z don tabbatar da cewa tsattsauran ra'ayi. hannun mutum-mutumi ya cika buƙatu a babban gudun.

    Ƙimar da aka ba da shawarar sune kamar haka: Z-ArmXX42 jerin Z-axis bugun jini> 600mm

    (2) Bayan bugun bugun Z-axis ya karu, a tsaye na axis na Z-axis da tushe za a ragu sosai. Idan tsauraran ƙayyadaddun ƙayyadaddun buƙatun ga axis na Z-axis da maƙasudin tushe ba su da amfani, da fatan za a tuntuɓi ma'aikatan fasaha daban.

    5.Power na USB hot-plugging haramun. Juya gargadi lokacin da aka katse ingantattun sanduna mara kyau da mara kyau na wutar lantarki.

    6. Kar a danna hannun kwance lokacin da wutar ke kashe.

    Robotic Arm na Masana'antu - Z-Arm-1832 (9)

    Hoto 4

    DB15 Mai Haɗi Shawarwari

    Robotic Arm na Masana'antu - Z-Arm-1832 (10)

    Hoto 5

    Samfurin da aka ba da shawarar: Namijin da aka yi da zinari tare da ABS harsashi YL-SCD-15M Mace mai launin zinari tare da ABS harsashi YL-SCD-15F

    Girman Bayani: 55mm*43*16mm

    (Duba Hoto na 5)

    Teburin Masu Haɗin Robot Arm

    Robot Arm Model No.

    Masu jituwa masu jituwa

    Saukewa: XX42T1

    Z-EFG-8S NK/Z-EFG-12 NK/Z-EFG-20 NM NMA/Z-EFG-20S/

    Z-EFG-30NM NMA bugu na 5th axis 3D

    Saukewa: XX42T2

    Z-EFG-50 DUK/Z-EFG-100 TXA

    Girman Tsarin Shigar Adaftar Wuta

    Tsarin wutar lantarki na XX42 24V 500W RSP-500-SPEC-CN

    Robotic Arm na Masana'antu - Z-Arm-1832 (11)

    Hoton Mahalli na Amfani da Waje na Robot Arm

    Robotic Arm na Masana'antu - Z-Arm-1832 (12)

    Kasuwancinmu

    Masana'antu-Robotic-Arm
    Masana'antu-Robotic-Arm-grippers

  • Na baya:
  • Na gaba:

  • Ku rubuta sakonku anan ku aiko mana