Gyaran Tsarin Aiki Mai Daidaito ta Hanyar Aiki tare da Maganin Haɗaka na SCIC na 4-Axis Cobot (SCARA)

Juyin Juya Halin Aiki na Daidaito ta hanyar amfani da Magani Mai Haɗaka na SCIC mai lamba 4-Axis Cobot (SCARA)

Bukatun abokin ciniki

- Masu ƙera Semiconductor: BuƙataDaidaiton matakin microndon sarrafa wafer, daidaita sassan, da haɗuwa ba tare da lahani ba don kiyaye yawan amfanin ƙasa mai yawa a cikin ƙaramin samar da guntu.
- Dakunan gwaje-gwaje: Bukataatomatik ba tare da kurakurai badon ayyukan da ake maimaitawa (misali, bututun mai, rarraba samfura) don hanzarta bincike, tabbatar da sake samarwa, da kuma bin ƙa'idodin inganci masu tsauri.
- Sauƙin Masana'antu: Nemirobot masu daidaitawawanda za a iya sake tsara shi cikin sauri don haɓaka ayyukan aiki ba tare da kashe kuɗi mai yawa ba.

Me yasa SCIC 4-Axis Cobot ya yi fice a cikin waɗannan rawar

- An ƙera shi da kyau don semiconductors:

An gina shi da tsarin servo mai matuƙar amsawa na Japan Oriental Motors da kuma daidaita hangen nesa mai amfani da fasahar AI, cobots ɗinmu suna cimma nasara.Maimaitawar sub-micron- yana da mahimmanci don sarrafa ƙananan wafers da ƙananan abubuwan da ke ciki.

- Aminci ga Dakunan gwaje-gwaje:

Kawar da kuskuren ɗan adam a cikin gwaje-gwaje masu haɗari tare daDaidaitacce 100%sarrafa ruwa, tara faranti, da kuma rarrabawa da sinadarai masu aiki, koda a cikin ayyukan sa'o'i 24/7.

- Sauƙin Sauya Tsarin Nan Gaba:

Buɗaɗɗen tsarin gine-gine da shirye-shirye masu sauƙin fahimta suna ba da damar sake tura ayyuka cikin sauri a cikin ayyuka, daga haɗin mutu na semiconductor zuwa saitin PCR na dakin gwaje-gwaje, yana tabbatar da ROI a cikin mahalli masu ƙarfi.

Maganin Haɗaka na SCIC

1. Don ƙera Semiconductor:

- Haɗa Wafer da Mutuwa: Zaɓi da wuri mai sauƙi tare da hangen nesa na AI don daidaita nanoscale.
- Duba LalacewaTsarin gani mai sauri wanda aka haɗa tare da daidaiton cobot.
- Daidaita Ɗakin TsaftaTsarin da ba shi da girgiza, mai ƙanƙanta, don muhallin da aka ba da takardar shaidar ISO.

2. Don Aiki da Dakunan Gwaji:

- Gudanar da ruwa: Pipetting mai shirye-shirye tare da daidaiton 0.1µL don gano kwayoyin halitta da magunguna.
- Gudanar da Samfura: Rarrabawa ta atomatik, yiwa lakabi, da adanawa don sauƙaƙe ayyukan aiki.
- Gudanar da Abubuwa Masu Haɗari: Siffofin aminci na haɗin gwiwa don ayyukan sinadarai ko haɗarin halittu.

3. Sauƙin Gudanar da Masana'antu:

Sake tsara ayyukan aiki cikin awanni ta hanyar hanyar ja-da-saukewa.
Haɗin kai mara matsala tare da PLCs, dandamalin IoT, da kayan aikin dakin gwaje-gwaje na gado.

Mahimman Bayanai: Bambancin SCIC

✅Daidaiton Ƙananan Micron: Fasaha ta Oriental Motors tana tabbatar da daidaito mara misaltuwa ga ayyukan semiconductor da ƙananan injiniya.
✅Bin Ka'idojin GLP/GMP: Binciken da aka shirya don gwaje-gwaje don dakunan gwaje-gwaje a fannin magunguna, bincike, da fasahar kere-kere.
✅Haɗin Wayo Mai Haɗawa da Toshewa: Masana'antu 4.0-shirye tare da nazarin girgije da kuma kula da hasashen yanayi.
✅Tsarin Ajiye Sarari: An inganta shi don ɗakunan tsafta masu cunkoso da kuma kujerun dakin gwaje-gwaje masu cunkoso.
✅Tsaro Ba Tare da Sasantawa Ba: Na'urori masu auna ƙarfi da gano karo don haɗin gwiwar ɗan adam.

Fasallolin Magani

(Amfanin Juyin Juya Halin Aiki Mai Daidaito ta atomatik tare da Maganin Haɗaka na SCIC na 4-Axis Cobot (SCARA))

Daidaiton Ƙananan Micron

Fasahar Oriental Motors tana tabbatar da daidaito mara misaltuwa ga ayyukan semiconductor da ƙananan injiniya.

Bin Ka'idojin GLP/GMP

Binciken da aka shirya don gwaje-gwaje don dakunan gwaje-gwaje a fannin magunguna, bincike, da kuma fasahar kere-kere.

Haɗin Wayo Mai Haɗawa da Toshewa

Tsarin 4.0 na masana'antu tare da nazarin girgije da kuma kula da hasashen yanayi.

Tsarin Ajiye Sarari

An inganta shi don ɗakunan tsafta da kuma kujerun dakin gwaje-gwaje masu cunkoso.

Kayayyaki Masu Alaƙa

Z-Arm-2442

- - Bugawar axis ta Z: 240mm (Tsawo za a iya keɓance shi)
  - Gudun layi: 1255.45mm/s (nauyin da aka ɗauka 1.5kg)
  - Maimaitawa: ±0.03mm
  - Matsakaicin nauyin kaya: 2kg
  - Matsakaicin nauyin da aka ɗauka: 3kg

Ƙarin Bayani

Z-Arm-1522

Bugawar axis ta Z: 150mm
Gudun layi: 500mm/s (nauyin da aka ɗauka 0.3kg)
Maimaitawa: ±0.1mm
Matsakaicin nauyin kaya: 0.3kg
Matsakaicin nauyin da aka ɗauka: 0.5kg

Ƙarin Bayani